Skip to main content
European Commission logo print header

Field programmable system on chip

Objective

- To develop a set of programmable analogue cells and routing resources. Cells will include analogue interfaces, DACs and ADC, amplifiers, filters. This function library will include a bridge to commercial standard-cell libraries to enable migration from programmed FIPSOC prototypes to classical ASIC solutions in case of large production volumes.

- The project will develop the first member of the FIPSOC family in a 0.5 micron CMOS process. It will integrate analogue functionality, approximately 5k programmable digital gates, an 8051 based microprocessor core, and programme/control memory.

- The project will develop a software toolkit to enable programming of both digital and analogue functionality as well as data processing and control functions undertaken by the on-board microprocessor. The toolkit will be PC based and include schematic capture, routing and chip interface capture and design functions.

- In order to demonstrate versatility, level of system integration and performance, the partners will use FIPSOC-1 in a number of industrial demonstrators including a coin recogniser for vending machines and a smart battery charger.

The aim is to develop the first member of a family of Field Programmable System-On-a-Chip (FIPSOC) devices. These circuits will integrate combinational logic blocks, programmable analogue cells for signal conditioning and data acquisition, and an on-board microprocessor. Configuration and control data will be stored in on-chip RAM memory. The on-board 8051 based microprocessor will be able to access both the configuration and the actual signals within the logic cells, providing a strong interaction between hardware and software. Standard, off-the-shelf FIPSOC devices will be configurable to a wide variety of tasks including analogue and digital data acquisition and processing as typically required by the electronic instrumentation and industrial process control sectors. Users can develop their own applications by implementing (programming) both hardware and software functions in the same device. The chip will be ideally suited as an easy-to-use system prototyping workbench as well as in low to medium volume product applications.

Call for proposal

Data not available

Coordinator

Semiconductores Investigacion y Diseno
EU contribution
No data
Address
Ptm, Isaac Newton S.N.
28760 Tres Cantos
Spain

See on map

Total cost
No data

Participants (5)