Cel Problem occurring for critical material removal, e.g. asbestos, with mechanical cutting methods have not been sufficiently solved in all European countries. When cutting asbestos or decontaminated materials with conventional techniques fibbers or other hazardous components are produced and the removed material must be specially treated and disposed. Furthermore, the surroundings have to be contaminated using safety measures and much technical equipment. As the dimensions of these fibbers and their diameter to length ratio cause a high physical risk, the fibbers must be contained, if possible. The problems described above can be avoided by a new removal processing system. In order to achieve the highest flexibility, a hand-guided laser which guarantees a clean and environment-friendly low-emission removal of asbestos will be developed further. Due to the thermal character of laser cutting processes, all emission particles have spherical morphologies, if the process is well adjusted. If no fibbers are generated the cutting process is clean. Programming or teaching is not necessary as for conventional CNC machines or robots and there is the advantage of high mobility of the system. Dziedzina nauki natural sciencesphysical sciencesopticslaser physics Program(-y) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Temat(-y) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Zaproszenie do składania wniosków Data not available System finansowania EAW - Exploratory awards Koordynator LASER PRODUKT GESELLSCHAFT FUER ANGEWANDTE LASERTECHNIK MBH Wkład UE Brak danych Adres 8,Bunker Stieg 8 31053 Alfeld Niemcy Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (1) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko QUANTA SYSTEM SRL Włochy Wkład UE Brak danych Adres Via Venezia Giulia 18 20157 MILANO Zobacz na mapie Koszt całkowity Brak danych