Skip to main content
European Commission logo print header

Validation of constraint-based assessment methodology in structural integrity

Objectif

At present, there is a disparity between the characteristics measured on nuclear reactor components and test specimens. In particular, in the pattern of crack-tip stresses and strains causing plastic flow and fracture (the so-called constraint effect). Crack-tip constraint in components is generally lower than in test specimens and effective toughness is correspondingly higher. The toughness measured on standard test specimens is therefore likely to underestimate that exhibited by cracks in components. The purpose of this project is to develop and validate, by an iterative process of experiment and analysis, innovative procedures for assessing possible states of crack-tip constraint in ageing nuclear pressure boundary components.

This will provide nuclear plant operators and regulators with:
(i) improved predictions of safety margins under normal and abnormal conditions, using a validated defect assessment methodology;
(ii) improved lifetime extension arguments.

Appel à propositions

Data not available

Régime de financement

CSC - Cost-sharing contracts

Coordinateur

SERCO LTD
Contribution de l’UE
Aucune donnée
Adresse
The Quadrant 404, Birchwood Park
WA3 6AT WARRINGTON
Royaume-Uni

Voir sur la carte

Coût total
Aucune donnée

Participants (12)