Skip to main content
European Commission logo print header
Zawartość zarchiwizowana w dniu 2022-11-21

Control of the temperature of the bar on entry to the finisher

Cel

The aim of this project is to design, build and test, in the normal operating conditions of the hot strip mill, a new short cooling equipment placed between the roughing and the finishing mill, in order to cool, in a very fast and controllable way, the bar coming out of the roughing mill. As far as the products are concerned, the effect of the bar cooling strategy will be assessed for different steel grades. Laboratory trials will be conducted in parallel to the industrial trials. With regard to the process, the following aspects will be analysed, among others: cooling rate, homogeneity, possibility of reduction of though thickness heterogeneity, efficiency of the descaler after bar cooling.
Contracts numbers:
7215-PA/030 7215-PB/030

Zaproszenie do składania wniosków

Data not available

System finansowania

CSC - Cost-sharing contracts

Koordynator

CENTRE DE RECHERCHES METALLURGIQUES
Wkład UE
Brak danych
Adres
Rue Ernest Solvay, 11
4000 LIEGE
Belgia

Zobacz na mapie

Koszt całkowity
Brak danych

Uczestnicy (1)