Objective Now, the sanded of wood pieces with special profiles is a manual operation since machines or devices that could adapt their self to the forms of the piece do not exist. This manual operation is expensive, slow and lead to discontinuities in the sandpapering that decrease the quality of the product. In addition, each door piece has to be process separately in several production processes. The objective is to develop a new highly reliable machine with special headstocks that adapt to the contour of the piece exerting the same pressure in the entire surface. These headstocks will be of an adaptable soft material like rubber or fatty foams. Specific RTD goal is to shortened the production phase by% more and over, processing all the different pieces of the door together in single production process, so that raw materials and natural resources will behaved. Fields of science agricultural sciencesagriculture, forestry, and fisheriesforestry Programme(s) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Topic(s) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Call for proposal Data not available Funding Scheme EAW - Exploratory awards Coordinator BRICO BLOCK S.A. EU contribution No data Address Carretera de Tembleque s/n. 45860 VILLACANAS (TOLEDO) Spain See on map Total cost No data Participants (1) Sort alphabetically Sort by EU Contribution Expand all Collapse all QUICKWOOD, S.R.L. Italy EU contribution No data Address Via delle Industrie, 38/2 A 33050 BAGNARIA ARSA See on map Total cost No data