Obiettivo The purpose of the project is to develop a new surface tr eatment for carbon fibres by: - plasma polymerziation of a monomer in gaseous phase on the fibre under the effect of a cold plasma; - electropolymerization based on polymerization of a monomer in an electrolytic bath. The development of improved or new carbon fibre based composite materials calls for new surface treatment techniques. Among these, deposition of a polymeric interphase between the reinforcement and the interface matrix is an attractive solution. This treatment should provide a greater degree of flexibility in the optimization of the fibre-matrix interface. It should also provide good resistance to the formation and propagation of microcracks for which present composite materials are sensitive. The deposition of a polymeric interphase is thus an important process in the interface production of high performance composite structures. Campo scientifico engineering and technologymaterials engineeringfibersengineering and technologymaterials engineeringcompositescarbon fibers Programma(i) FP1-EURAM - Research programme (EEC) on materials (raw materials and advanced materials) - Advanced materials (EURAM) -, 1986-1989 Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore FACULTES UNIVERSITAIRES NOTRE DAME DE LA PAIX Contributo UE Nessun dato Indirizzo RUE DE BRUXELLES 61 5000 NAMUR Belgio Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto University of Bath Regno Unito Contributo UE Nessun dato Indirizzo Claverton Down BA2 7AY Bath Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato