Objectif Modern design rules are based on limit state design, which considers ultimate limit states and limit states of serviceability. For these different limit states, the designer ensures a sufficient safety by using factors YM on the material properties and YF on the loads. The determination of these safety factors has been based on expert judgement, experience and a probabilistic approach. It is the aim of this project to perform complete reliability analysis of steel, composite and concrete buildings in order to highlight the advantage of the steel construction and to quantify in a scientific and mathematical way the safety level of the different construction types. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) F6 - Steel structures Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur PROFILARBED-RECHERCHES Contribution de l’UE Aucune donnée Adresse 66, rue de Luxembourg 4221 ESCH-SUR-ALZETTE Luxembourg Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire LULEÅ UNIVERSITY OF TECNOLOGY Suède Contribution de l’UE Aucune donnée Adresse 97187 LULEÅ Voir sur la carte Coût total Aucune donnée RWTH - INSTITUTE OF STEEL CONSTRUCTION Allemagne Contribution de l’UE Aucune donnée Adresse Mies-van-der-Rohe Strasse 1 52074 AACHEN Voir sur la carte Coût total Aucune donnée UNIVERSITÉ DE LIEGE Belgique Contribution de l’UE Aucune donnée Adresse Place du XX Août 7 LIEGE Voir sur la carte Coût total Aucune donnée