Cel The final goal of the present Pilot/Demonstration project is to allow conventional continuous slab casters to reach the highest possible casting speed, compatible with their current metallurgical lengths, and to demonstrate the possibility for thin slab casters to reach casting speeds higher than 10m/mn. The study will focus on the medium carbon steels (0,1% equivalent carbon) and austenitic stainless steels. For thin-slab casters it is of the first importance to prove that it is possible to directly connect one strand caster with the rolling mill. For this, it is necessary to cast higher than 10m/min for all steel grades. This project proposes some very new approaches for the feeding of metal and the cooling of the thin slab. Program(-y) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Temat(-y) T2 - Continuous casting Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Wkład UE Brak danych Adres Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Francja Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (1) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko CENTRE DE RECHERCHES METALLURGIQUES Belgia Wkład UE Brak danych Adres Rue Ernest Solvay, 11 4000 LIEGE Zobacz na mapie Koszt całkowity Brak danych
