Skip to main content
European Commission logo print header
Contenido archivado el 2022-11-21

Demonstration of a high temperature metallic filter on sinter plant wind main gas

Objetivo

In a previous ECSC-funded research project, the performances of a high- temperature metallic filter were investigated at a very small scale. The system was installed on a production plant and was shown to be capable of achieving outlet particulate concentrations of less than 10 mg/Nm3. Trace organic emissions were also reduced by injection of carbon-based adsorbents into the waste gas stream. The proposal is to build a larger scale plant and to install it on an operational sinter strand to further evaluate the performance of the filter under the conditions of continuous operation.

Convocatoria de propuestas

Data not available

Régimen de financiación

CSC - Cost-sharing contracts

Coordinador

CORUS UK LIMITED
Aportación de la UE
Sin datos
Dirección
15 Great Marlborough Street
W1F 7AS LONDON
Reino Unido

Ver en el mapa

Coste total
Sin datos