Objectif Faced with the economical development of moulds and tool steels, and the challenge from aluminium industry, steel-makers must understand the metallurgical parameters controlling the shaping of these materials. This research project will attempt to quantify the effects of chemical composition, specific additions, mechanical and physical characteristics on high speed machining and welding. It will also examine the effects of these metallurgical and technological parameters on chemical etching of moulds and tool steels. In particular, the problems of chemical etching on high speed machined and welded surfaces will be studied by a metallurgical investigation. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) F3 - Special and alloy steels Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CREUSOT-LOIRE INDUSTRIE Contribution de l’UE Aucune donnée Adresse USINE DU CREUSOT 56, rue Clémenceau 71202 LE CREUSOT France Voir sur la carte Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire Standex International Srl Italie Contribution de l’UE Aucune donnée Adresse Via I Maggio 20 20064 Gorgonzola Milano Voir sur la carte Coût total Aucune donnée UDDELHOLM TOOLING Suède Contribution de l’UE Aucune donnée Adresse 683 85 HAGFORS Voir sur la carte Coût total Aucune donnée