Objectif This project is aimed at improving reheat furnace control using the feedback of process measurements available on a routine basis. The primary objective of the project is to develop and demonstrate the methodology required for an effective reheat furnace control system to improve the temperature consistency of hot rolling feedstock discharged from reheating furnaces. The work programme will address strip, plate and long product hot rolling practices to improve consistency of final product properties. Several feedback strategies and a range of products and furnace designs will be investigated. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) D1 - Rolling - long products and reheating furnaces Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRO SVILUPPO MATERIALI SPA Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100/102 00128 ROMA EUR Italie Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire British Steel plc Royaume-Uni Contribution de l’UE Aucune donnée Adresse Moorgate S60 3AR Rotherham Voir sur la carte Coût total Aucune donnée MEFOS, FOUNDATION FOR METALLURGICAL RESEARCH Suède Contribution de l’UE Aucune donnée Adresse Aronstorpsvägen 1 971 25 LULEÅ Voir sur la carte Coût total Aucune donnée SIDENOR I+D Espagne Contribution de l’UE Aucune donnée Adresse Barrio Ugarte s/n 48970 BASAURI (VIZCAYA) Voir sur la carte Coût total Aucune donnée