Obiettivo The purpose of the project is to establish a close link between the length dependent hot strip characteristics cross thickness profile and camber and set-up and control of cold rolling mill. To this an incoming strip oriented command system and an open-loop control system for the command variables will be developed using data based hybrid models and knowledge about the influencing strip and process parameters. The specific aims are to improve cold strip flatness, reduce residual stresses, improve the operating process and reduce the camber. This will increase both the production and the product quality. The findings of the developed methods will be directly transferable to all cold mills. Programma(i) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Argomento(i) D2 - Rolling - flat products Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore Verein Deutscher Eisenhüttenleute eV Contributo UE Nessun dato Indirizzo Sohnstraße 65 40237 Düsseldorf Germania Mostra sulla mappa Costo totale Nessun dato Partecipanti (3) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto British Steel plc Regno Unito Contributo UE Nessun dato Indirizzo Moorgate S60 3AR Rotherham Mostra sulla mappa Costo totale Nessun dato EKO STAHL Germania Contributo UE Nessun dato Indirizzo 15872 EISENHÜTTENSTADT Mostra sulla mappa Costo totale Nessun dato IRSID, GROUPE USINOR Francia Contributo UE Nessun dato Indirizzo 57283 MAIZIERES-LES-METZ CEDEX Mostra sulla mappa Costo totale Nessun dato