Objetivo Steel production via the EAF is becoming more and more relevant. During the last years, EAF technology has also been aimed at increasing the productivity by decreasing the specific electric energy consumption. An important route to reach this aim is scrap preheating. Presently, a new way of continuously charging the scrap is emerging, tightly bound to the post-combustion of process gas. This project involves the post-combustion optimisation of a gas flowing in a lateral continuous system of charging scraps. This objective will be attained through the management of post-combustion in the preheating tunnel and a rational choice of scrap type charging sequence; the environmental impact of this technology will be investigated. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) T1 - Iron and steelmaking Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador O.R.I. MARTIN - ACCIAIERIA E FERRIERA DI BRESCIA Aportación de la UE Sin datos Dirección Via Cosimo Canovetti 13 25128 BRESCIA Italia Ver en el mapa Coste total Sin datos Participantes (2) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo CENTRO SVILUPPO MATERIALI Italia Aportación de la UE Sin datos Dirección Via di Castel Romano 100 00128 ROMA EUR Ver en el mapa Coste total Sin datos TECHINT - COMPAGNIA TECNICA INTERNAZIONALE S.P.A. Italia Aportación de la UE Sin datos Dirección Via Leonardo da Vinci, 20 21053 CASTELLANZA (VARESE) Ver en el mapa Coste total Sin datos