Objectif Steel production via the EAF is becoming more and more relevant. During the last years, EAF technology has also been aimed at increasing the productivity by decreasing the specific electric energy consumption. An important route to reach this aim is scrap preheating. Presently, a new way of continuously charging the scrap is emerging, tightly bound to the post-combustion of process gas. This project involves the post-combustion optimisation of a gas flowing in a lateral continuous system of charging scraps. This objective will be attained through the management of post-combustion in the preheating tunnel and a rational choice of scrap type charging sequence; the environmental impact of this technology will be investigated. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) T1 - Iron and steelmaking Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur O.R.I. MARTIN - ACCIAIERIA E FERRIERA DI BRESCIA Contribution de l’UE Aucune donnée Adresse Via Cosimo Canovetti 13 25128 BRESCIA Italie Voir sur la carte Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRO SVILUPPO MATERIALI Italie Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100 00128 ROMA EUR Voir sur la carte Coût total Aucune donnée TECHINT - COMPAGNIA TECNICA INTERNAZIONALE S.P.A. Italie Contribution de l’UE Aucune donnée Adresse Via Leonardo da Vinci, 20 21053 CASTELLANZA (VARESE) Voir sur la carte Coût total Aucune donnée
