Objetivo The objective of the project is to provide the metallurgists with a fast method and apparatus for process segregation evaluation. The first step will be to develop an apparatus able to treat large samples (400 mm x 150 mm). The second step is to improve the resolution to obtain an apparatus and a technique whose performances can be compared with those of the chemical techniques currently applied. The third step deals with the information and the improvement of the process. The last part of the project concerns the application of this technique in industrial environment for some usual steel grades on billet or slab forms. A round robin test will define the real possibilities of such a new technique. The final goal will be an on-site apparatus able to quantify, in a short time, segregations in slabs and billets. This new technique will allow the minimisation of problems of pollution and safety due to the use and the elimination of chemical products. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) T4 - On-line control Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Aportación de la UE Sin datos Dirección Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Francia Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo Dillinger Hüttenwerke AG Alemania Aportación de la UE Sin datos Dirección 66748 Dillingen Ver en el mapa Coste total Sin datos SIDENOR I+D España Aportación de la UE Sin datos Dirección Barrio Ugarte s/n 48970 BASAURI (VIZCAYA) Ver en el mapa Coste total Sin datos SPECTRO ANALYTICAL INSTRUMENTS Alemania Aportación de la UE Sin datos Dirección Boschstrasse, 10 4190 KLEVE Ver en el mapa Coste total Sin datos