Skip to main content
European Commission logo print header
Zawartość zarchiwizowana w dniu 2022-11-21

Ultrasonic examination of the surfaces condition of rolled beams

Cel

This research is intended to develop an industrially applicable non-destructive method for examining surface defects in beams making it possible to quantify the defects at depth and to achieve a minimum detection threshold of 0.3 mm. The research will therefore concentrate on applying the method of ultrasonically generated surface waves which was adopted after an intensive preliminary study in which ARBED analysed and tested the techniques of Foucault currents, video recording, visual detection and the inductive heating approach combined with IR cameras. With the results of this work it will be possible to create a fully-automated (robotized) inspection line for cold-rolled beams and subsequently for hot-rolled beams.

Zaproszenie do składania wniosków

Data not available

System finansowania

CSC - Cost-sharing contracts

Koordynator

ARBED RECHERCHES
Wkład UE
Brak danych
Adres

4009 ESCH-SUR-ALZETTE
Luksemburg

Zobacz na mapie

Koszt całkowity
Brak danych

Uczestnicy (1)