Cel Nut setting systems are often used in automotive and machinery industry. Systems for tighten M 16 - M 30 screws are heavy, difficult to operate and have a high risk of injuries. The main RTD goals can be described as followed:1. Installation of an ergonomic workplace with the benefits of reduced illness of the operator and accident rate.2. A process controlled screwing system with secure screw connections. The result of a controlled screwing is the application of smaller screws with a lower tightening torque, reduced wall thickness of the screw connections and consequently a lighter design of machinery parts.3. Low weight design for the nut setting system using lighter or higher strength materials for the torque transmission and the body of the system. Program(-y) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Temat(-y) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Zaproszenie do składania wniosków Data not available System finansowania EAW - Exploratory awards Koordynator SYSTEMATIC PROJECTA MONTAGEAUTOMATION GMBH Wkład UE Brak danych Adres Fahrenheistrasse 1 28539 BREMEN Niemcy Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (1) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko SARMAS SPA Włochy Wkład UE Brak danych Adres Strada Settimo 366 10156 TORINO (TURIN) Zobacz na mapie Koszt całkowity Brak danych