Objective The project is iron foil by the applicant's own concerned with the experimental production of patented method-called ELECTROFOIL-based on a technique currently used in the copper industry. A pilot plant similar to an industrial plant but with limited equipment for budgetary reasons will be built to produce 300 mm wide and 30 um thick strip at a rate of 50 kg/hour. This project has been fully accepted but, for budgetary reasons, the financial support will be delivered in two parts; the second part is included in the reserve list in annex II. For industrial programmmation reasons, the contract will start on 1st April 1990. Programme(s) ECSC-STEELDEM 2C - Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1988-1992 Topic(s) T3 - Rolling and product treatment Call for proposal Data not available Funding Scheme DEM - Demonstration contracts Coordinator CENTRE DE RECHERCHES METALLURGIQUES EU contribution No data Address Rue Ernest Solvay, 11 4000 LIEGE Belgium See on map Total cost No data Participants (4) Sort alphabetically Sort by EU Contribution Expand all Collapse all ARBED Luxembourg EU contribution No data Address Avenue de la Liberté 19 2930 LUXEMBOURG See on map Total cost No data COKERILL SAMBRE Belgium EU contribution No data Address Rue de l'Usine 1 6010 COUILLET See on map Total cost No data KONINKLIJKE HOOGOVENS Netherlands EU contribution No data Address 1970 CA IJMUIDEN See on map Total cost No data SIDMAR Belgium EU contribution No data Address John Kennedylaan 51 9042 GENT See on map Total cost No data