Skip to main content
italianoIT
European Commission logo print header
Contenuto archiviato il 2022-11-21

Controlling wear and surface cleanliness during cold rolling

Obiettivo

Excessive iron fines generation during rolling is of nuisance, both in the mill and in subsequent production steps. The aim of the project is to control the iron fines and oil residues generated during a cold rolling process.

To achieve that objective, research is focused on three poles:
- Establish full understanding on the underlying wear mechanisms.
- Determine the parameters that influence dirt generation during rolling and capture the quantitative effects in a physically based model.
- Development of an online measurement method to determine the amount of generated dirt.

The expected returns are important cost savings in the mill, increase in batch-annealing capacity and a general increase in client satisfaction.

Programma(i)

Argomento(i)

Data not available

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

Data not available

Coordinatore

CORUS TECHNOLOGY BV
Contributo UE
Nessun dato
Indirizzo
WENCKEBACHSTRAAT 1
VELSEN NOORD
Paesi Bassi

Mostra sulla mappa
Costo totale
Nessun dato

Partecipanti (6)

Condividi questa pagina

Scarica

Ultimo aggiornamento: 24 Novembre 2006

Il mio booklet

Permalink: https://cordis.europa.eu/project/id/RFSR-CT-2006-00010/it

European Union, 2024