Skip to main content
Go to the home page of the European Commission (opens in new window)
English English
CORDIS - EU research results
CORDIS
Content archived on 2024-06-18

Fabrication of capacitive biosensors using the Laser Induced Forward Transfer process

Objective

Biosensor research has blossomed into a mature and highly active field over the past 20 years, both in the laboratory and in the commercial sector. This area attracts enormous attention due to the promise it holds for vital aspects of the human life. The proposed work aims to fabricate a capacitive biosensor, which will be able to perform label-free and fast biodetection based on very small biological samples. We will use the Laser Induced Forward Transfer (LIFT) process for the deposition of biomolecules on the sensor surface. The use of the LIFT technique allows for excellent size control of the deposited samples, as well as repeatability and miniaturization. The use of a capacitive transducer, with an ultra thin silicon membrane acting as one of the capacitor plates, will allow for high sensitivity and low-power operation. The biosensor will be tested with simple binding reactions as well as DNA hybridization. Eventually this sensor can be used with thousands of analytes, such as proteins, different DNA strands, and pathogens. Each step of the fabrication process allows for miniaturization, therefore this biosensor will be a prime candidate for microarray integration in the future. The host group has extensive expertise both in the implementation of the LIFT method and in the fabrication of capacitive sensors and is well-equipped for the proposed work. The researcher has degrees in Electrical Engineering and Physics, while she did her Ph.D. on laser-matter interactions, and is a very good match for this project. This grant will allow the researcher to transfer knowledge from the USA, where she completed her graduate studies, to the European community and reintegrate as a permanent researcher in Europe. A number of students and scientists from various fields will be involved in the proposed experiments. All the results will be published in peer-reviewed journals and will be presented at conferences, while patents will be filed where applicable.

Fields of science (EuroSciVoc)

CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.

You need to log in or register to use this function

Keywords

Project’s keywords as indicated by the project coordinator. Not to be confused with the EuroSciVoc taxonomy (Fields of science)

Topic(s)

Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.

Call for proposal

Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.

FP7-PEOPLE-2007-4-3-IRG
See other projects for this call

Funding Scheme

Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.

MC-IRG - International Re-integration Grants (IRG)

Coordinator

ETHNICON METSOVION POLYTECHNION
EU contribution
€ 81 250,00
Address
HEROON POLYTECHNIOU 9 ZOGRAPHOU CAMPUS
157 72 ATHINA
Greece

See on map

Region
Αττική Aττική Κεντρικός Τομέας Αθηνών
Activity type
Higher or Secondary Education Establishments
Links
Total cost

The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.

No data
My booklet 0 0