Objectif Main objective is the development of an innovative strip finishing procedure by combining tension levelling and skin pass rolling into one production step and thus to shorten the process chain. During former RFCS-projects [R1, R2] it could be proved that the mechanical characteristics of strip material mainly adjusted during the skin pass rolling process are possible to be achieved as well during a pure tension levelling process by variation of applied tension and bending load.The realisation of the desired surface texture requires an additional superposed deformation under pressure introduced simultaneously in those strip sections where the yield strength of the material already is met by the applied tension-bending procedure. Using the new facility it will be possible to adjust material mechanical and surface roughness properties independently. Programme(s) ECSC-COAL-STEEL-RTD C - Research Programme of the Research Fund for Coal and Steel Thème(s) Data not available Appel à propositions Data not available Régime de financement Data not available Coordinateur VDEH - BETRIEBSFORSCHUNGSINSTITUT GMBH Contribution de l’UE Aucune donnée Adresse SOHNSTRASSE 65 DUESSELDORF Allemagne Voir sur la carte Coût total Aucune donnée Participants (4) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire BILSTEIN GMBH & CO. KG Allemagne Contribution de l’UE Aucune donnée Adresse IM WEINHOF HAGEN Voir sur la carte Coût total Aucune donnée INSTITUTO DE SOLDADURA E QUALIDADEASSOCIACAO Portugal Contribution de l’UE Aucune donnée Adresse AVENIDA DO PROFESSOR DOUTORCAVACO SILVA 33PARQUE DAS TECNOLOGIAS PORTO SALVO Voir sur la carte Coût total Aucune donnée SUNDWIG GMBH Allemagne Contribution de l’UE Aucune donnée Adresse Stephanopeler Strasse 22 HEMER Voir sur la carte Coût total Aucune donnée UNIVERSIDAD DE LA RIOJA Espagne Contribution de l’UE Aucune donnée Adresse AVENIDA DE LA PAZ 107 LOGRONO Voir sur la carte Coût total Aucune donnée