Skip to main content
European Commission logo print header
Content archived on 2024-04-19

Prenormative Requirements for Intelligent Actuation and Measurement

Objective

The objective of PRIAM is to develop a new class of modular, standardised and interchangeable intelligent actuators and transmitters. PRIAM will build on the DIAS project (2172) and include the definition and validation of fieldbus companion standards for intelligent actuators and transmitters, with specific emphasis on the integration of intelligent field devices into a CIM architecture for the process industry.

The approach will be to:

- define a pre-normative set of functions for intelligent field devices
- demonstrate that these functions can be supported by a CASE tool
- produce prototype intelligent field devices implementing these functions
- validate the functions and field devices by laboratory
- assess the economic benefit of using intelligent field devices
- prepare a pre-normative proposal for use by European standardisation bodies.

The results will be disseminated and promoted through a PRIAM working group (EIAMUG). Vendor members of the consortium expect to use the results of the project in the development of intelligent transmitters and actuators, in the design of process control systems, and in the development of process control software.

Topic(s)

Data not available

Call for proposal

Data not available

Funding Scheme

Data not available

Coordinator

Sema Group SA
EU contribution
No data
Address
16-20 rue Barbes
92126 Montrouge
France

See on map

Total cost
No data

Participants (15)