Objective
The aim of this research project is to investigate the usefulness of advanced flight simulator concepts for teaching pilots to detect and recover from flight upsets. The term “flight upset” indicates a situation when an aircraft in flight unintentionally exceeds the parameters normally experienced in line operations or training. Loss of control due to unsuccessful upset recovery is considered an important factor in civil aviation accidents. There is a clear need for the simulation of unusual flight attitudes, as a means to train pilots recovery procedures. Exercising these conditions in the real world is unsafe, expensive and, if performed in smaller aircraft, not representative of the situation in transport aircraft. Therefore, ground-based simulation of these extreme conditions is the only viable option for pilot instruction. However, at present, hexapod-based flight simulators used for pilot training are not equipped for this purpose, due to limitations of the mathematical aircraft models, and restricted simulator motion capabilities. We believe that ground-based simulation of upset recovery is feasible when innovations in different research areas will be adequately combined. To demonstrate this, real flight tests will be performed with transport aircraft in unusual attitudes. The recorded motion profiles will serve to extend mathematical aircraft models with engineering tools. In addition, current motion cueing software will be innovated to reproduce the high G-loads and extreme attitudes representative to upset recovery. Then the simulator concept will be evaluated on a new generation flight simulator (DESDEMONA) with advanced motion capabilities, and compared to hexapod-based flight simulators. The final outcome will be a set of requirements for successful ground-based simulation of upset recovery, which will contribute to better pilot training to identify and recover from flight upsets. Hence, this project contributes directly aircraft safety.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- natural sciences computer and information sciences software
- engineering and technology mechanical engineering vehicle engineering aerospace engineering aircraft
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback. You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Keywords
Project’s keywords as indicated by the project coordinator. Not to be confused with the EuroSciVoc taxonomy (Fields of science)
Project’s keywords as indicated by the project coordinator. Not to be confused with the EuroSciVoc taxonomy (Fields of science)
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
FP7-AAT-2008-RTD-1
See other projects for this call
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Coordinator
2595 DA Den Haag
Netherlands
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.