Skip to main content
Go to the home page of the European Commission (opens in new window)
English English
CORDIS - EU research results
CORDIS

Embedded storage elements on next MCU generation ready for AI on the edge

Project description

High-performance system on a chip for edge computing

Fully depleted silicon on insulator (FD-SOI) is an innovative technology that leverages the established planar process, while delivering successive generations of smaller chips. It helps keep the Moore’s law going without involving complex manufacturing processes. The EU-funded StorAIge project aims to develop and industrialise the 28 nm FD-SOI transistor and embedded phase-change memory to develop high-performance, ultralow-power system-on-chip solutions for edge computing applications. The project targets chipset and solutions with very efficient memories and high computing power targeting 10 TOPS/W. StorAIge will help define how artificial intelligence could drive next-generation edge devices, with special focus on automotive, industrial and security applications.

Objective

The main objective of the storAIge project is the development and industrialization of FDSOI 28nm and next generation embedded Phase Change Memory (ePCM) world-class semiconductor technologies, allowing the prototyping of high performance, Ultra low power and secured & safety System on Chip (SoC) solutions enabling competitive Artificial Intelligence (AI) for Edge applications. The main challenge addressed by the project is on one hand to handle the complexity of sub-28nm ‘more than moore’ technologies and to bring them up at a high maturity level and on the other hand to handle the design of complex SoCs for more intelligent, secure, flexible, low power consumption and cost effective. The project is targeting chipset and solutions with very efficient memories and high computing power targeting 10 Tops per Watt.
The development of the most advanced automotive microcontrollers in FDSOI 28nm ePCM will be the support technology to demonstrate the high performances path as well as the robustness of the ePCM solution. The next generation of FDSOI ePCM will be main path for general purpose advanced microcontrollers usable for large volume Edge AI application in industrial and consumer markets with the best compromise on three requirements: performances, low power and adequate security.
On top of the development and industrialization of silicon process lines and SoC design, storAIge will also address new design methodologies and tools to facilitate the exploitation of these advanced technology nodes, particularly for high performance microcontrollers having AI capabilities. Activities will be performed to setup robust and adequate Security and Safety level in the final applications, defining and implementing the good ‘mixture’ and tradeoff between HW and SW solutions to speed up adoption for large volume applications.

Fields of science (EuroSciVoc)

CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
This project's classification has been validated by the project's team.

Keywords

Project’s keywords as indicated by the project coordinator. Not to be confused with the EuroSciVoc taxonomy (Fields of science)

Programme(s)

Multi-annual funding programmes that define the EU’s priorities for research and innovation.

Topic(s)

Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.

Funding Scheme

Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.

IA - Innovation action

See all projects funded under this funding scheme

Call for proposal

Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.

(opens in new window) H2020-ECSEL-2020-1-IA-two-stage

See all projects funded under this call

Coordinator

STMICROELECTRONICS CROLLES 2 SAS
Net EU contribution

Net EU financial contribution. The sum of money that the participant receives, deducted by the EU contribution to its linked third party. It considers the distribution of the EU financial contribution between direct beneficiaries of the project and other types of participants, like third-party participants.

€ 5 660 860,50
Address
RUE JEAN MONNET 850
38920 CROLLES
France

See on map

Region
Auvergne-Rhône-Alpes Rhône-Alpes Isère
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost

The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.

€ 28 304 302,50

Participants (43)

My booklet 0 0