Welding Metallurgy and Cracking in Superalloys

Objective

"Predictive, metallurgy informed crack criteria will be developed within the WELDMECS project. These crack criteria are developed in a format appropriate for implementation to finite element software. It will be useful for general thermo-mechanical simulations estimating the risk for various crack formations. The primary target in current topic description (JTI-CS-2012-3-SAGE-02-029) is to utilize the crack criteria for both welding and heat treatment simulations. Since cracking during welding or heat treatment is a many-faceted problem, care has been taken to strongly incorporate fundamental metallurgical understanding and testing into the models. The model will be based on actual failure mechanisms, metallurgical changes and their relations to the material response and prevailing thermo-mechanical conditions.
Up to date – simulations have focused on geometric tolerances and/or prediction of residual stresses. Only simpler, limited defect criteria have been used in this context. The current project is expected to further the modeling of manufacturing processes in the area of predicting crack formations."

Fields of science

• engineering and technologymechanical engineeringmanufacturing engineering
• natural sciencescomputer and information sciencessoftware
• engineering and technologymaterials engineeringmetallurgy

Programme(s)

• FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives

Topic(s)

• JTI-CS-2012-3-SAGE-02-029 - Development and validation of a metallurgically based simulation model for crack generation during welding and heat treatment of superalloys

Call for proposal

SP1-JTI-CS-2012-03
See other projects for this call

Funding Scheme

Coordinator

Participants (2)