Project description
Two-dimensional materials for the post-Moore's law era
The information technology industry has been piggybacking on Moore's law for delivering successive generations of cheaper and more powerful microchips. According to forecasts, though, Moore's law will end by around 2025. Therefore, the industry is searching for other materials with semiconducting properties that could form the basis for an alternative chip. Efforts to build practical and commercial electronic devices using 2D materials have foundered on concerns over their complex synthesis and manipulation. The EU-funded 2D-HETERO project plans to overcome these challenges by synthesising Van der Waals heterostructures based on different 2D materials and stacking the materials on top of each other. To achieve its goals, the project will conduct interdisciplinary research that will span materials science, physics, chemistry and electrical engineering.
Objective
Moore’s law has enabled the $4 trillion worldwide IT industry to nearly double the performance and functionality of digital electronics roughly every two years within a fixed cost and area. However, the International Semiconductor Technology Blueprint (ITRS) predicts that the technological underpinnings for Moore’s law will end by 2025. IRTS points out that two-dimensional (2D) materials will bring new opportunities for the Post-Moore Era, especially for the CMOS technology beyond 5 nm node. However, very few 2D materials based electronic products are available commercially over the decades of study. With the scaling-down of the electronic devices, it is urgent for academia and industry to seek ways to integrate 2D materials in practical and commercial electronic devices. Introducing 2D materials in the structure of commercial electronic devices is challenging due to their complex synthesis and manipulation. The 2D-HETERO project will explore large wafer-scale (from 2-inch to 300 mm) and uniform growth of different 2D materials by chemical vapor deposition (CVD) method. Van der Waals heterostructures based on different 2D materials will be developed by stacking 2D materials through the direct growth or through clean and large wafer-scale transfer methods. The developed high quality and wafer-scale van der Waals heterostructures will be integrated in different nanoelectronics (mainly field effect transistors), with the goal of enhancing the device performance, yield and uniformity. Using an interdisciplinary approach that combines materials science, physics, electrical engineering, industry-relevant nanofabrication and characterization, 2D-HETERO will pave the way to industrialize 2D materials based nanoelectronics. The combination of learning through research and a comprehensive training plan, including both scientific and technological as well as soft skills, will strongly enhance the profile of the applicant and provide a boost for her future scientific career.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
- engineering and technology nanotechnology nano-materials two-dimensional nanostructures
- engineering and technology electrical engineering, electronic engineering, information engineering electrical engineering
- engineering and technology electrical engineering, electronic engineering, information engineering electronic engineering digital electronics
- engineering and technology nanotechnology nanoelectronics
- social sciences law
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback. You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
-
H2020-EU.1.3. - EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions
MAIN PROGRAMME
See all projects funded under this programme -
H2020-EU.1.3.2. - Nurturing excellence by means of cross-border and cross-sector mobility
See all projects funded under this programme
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
MSCA-IF-EF-ST - Standard EF
See all projects funded under this funding scheme
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
(opens in new window) H2020-MSCA-IF-2019
See all projects funded under this callCoordinator
Net EU financial contribution. The sum of money that the participant receives, deducted by the EU contribution to its linked third party. It considers the distribution of the EU financial contribution between direct beneficiaries of the project and other types of participants, like third-party participants.
3001 Leuven
Belgium
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.