Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 10 of 1242
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
High-frequency ELectro-Magnetic technologies for advanced processing of ceramic matrix composites and graphite expansion
ID: 280464
Start date: 2012-06-01, End date: 2016-05-31
"Lightweight ceramics and fibre reinforced ceramic composites, such as non-oxide Ceramic Matrix Composites (CMCs) and Expanded Graphite (EG), represent very promising solutions for high temperature applications in strategic industrial sectors, such as transport and energy. In...
Programme: FP7-NMP
Record Number: 103660
Last updated on: 2015-03-10
Artificial Mitochondria for Health
[PROJECT] mitochon - Artificial Mitochondria for Health
ID: 338133
Start date: 2013-12-01, End date: 2018-11-30
Mitochondria are cell organelles that provide the energetic requirements of the body. The majority of cellular ATP is produced by the membrane protein ATP synthase through a proton gradient across the mitochondrial inner membrane. Alterations in ATP synthase biogenesis can re...
Programme: FP7-IDEAS-ERC
Record Number: 110273
Last updated on: 2016-03-31
Mid-Term Report Summary - MITOCHON (Artificial Mitochondria for Health)
mitochon quests to build a biomimetic system able to produce the chemical energy in form of ATP inside the eukaryotic cell. To achieve this goal we have been working on three parallel research lines: the collection of the biological building blocks, the targeting and...
Programme: FP7-IDEAS-ERC
Record Number: 189652
Last updated on: 2016-10-13
Final Report Summary - TESTHEMAS (Design and Implementation of a Load Simulator Rig and Ground Test Bench Adaptation Kit for a HEMAS Test Rig)
The TESTHEMAS project will design, manufacture and tune an innovative and smart Test Rig for linear actuators that will be capable of conducting synchronized tests on three assemblies of Helicopter linear Electro Mechanical Actuators (HEMAS) while applying different...
Programme: FP7-JTI
Record Number: 189225
Last updated on: 2016-09-16
Design and Implementation of a Load Simulator Rig and Ground Test Bench Adaptation Kit for a HEMAS Test Rig
ID: 325912
Start date: 2013-04-01, End date: 2016-03-31
"The TESTHEMAS project will design, manufacture and tune an innovative and smart Test Rig for linear actuators that will be capable of conducting synchronized tests on three assemblies of Helicopter linear Electro Mechanical Actuators (HEMAS) while applying different counterl...
Programme: FP7-JTI
Record Number: 108848
Last updated on: 2015-03-11
Development of NEXT GENeration cost efficient automotive CATalysts
ID: 280890
Start date: 2012-02-01, End date: 2016-01-31
The main objective of NEXTGENCAT proposal is the development of novel eco-friendly nano-structured automotive catalysts utilizing transition metal nanoparticles (Cu, Ni, Co Zn, Fe etc) that can partially or completely replace the PGMs. Based on nanotechnology, low cost nanopa...
Programme: FP7-NMP
Record Number: 102135
Last updated on: 2016-11-07
Final Report Summary - NESMONIC (NET SHAPE MANUFACTURE OF Ni SUPERALLOY ENGINE CASING)
The final result of Nesmonic project is a validated cost effective NSHIP manufacturing route for IN718 parts for aero-engine application. To obtain this result it has been necessary to optimize all steps of powder manufacturing route. Initially, a complete characterization of...
Programme: FP7-JTI
Record Number: 188171
Last updated on: 2016-08-19
NET SHAPE MANUFACTURE OF Ni SUPERALLOY ENGINE CASING
ID: 337568
Start date: 2013-04-15, End date: 2016-04-14
This response to the call for proposals under the Clean Sky Joint Undertaking to manufacture static engine components from IN718 using Net Shape Hot Isostatic Pressing of powder (NSHIP) involves 3 partners with complementary expertise in the areas required to undertake the wo...
Programme: FP7-JTI
Record Number: 109210
Last updated on: 2016-06-20
Periodic Report Summary 3 - WISDOM (WING STRUCTURAL TEST DEVELOPMENT METHOD)
WISDOM main objective is to approach an innovative and reliable solution for the design, manufacturing, set up and Commissioning and performance & analysis of the structural test of the port and starboard outer wing sections needed for flight...
Programme: FP7-JTI
Record Number: 187873
Last updated on: 2016-08-24
WING STRUCTURAL TEST DEVELOPMENT METHOD
ID: 325978
Start date: 2013-01-14, End date: 2016-10-13
The proposal approach innovative solutions for the design and manufacturing of the test rig and the definition of the method and prformance for the structural testing of two different kinds of configuration for the outer wings within a Smart Fixed Wing Aircraft. The WISDOM pr...
Programme: FP7-JTI
Record Number: 108866
Last updated on: 2017-01-23
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-02-27