Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (64)
Report Summary (3)

Country

Belgium (7)
France (15)
Germany (11)
Italy (7)
Luxembourg (4)
Netherlands (4)
Spain (7)
United Kingdom (11)

Advanced search

Search projects and results

Results 1 - 10 of 67
Results/page:
12 3 4 5 6 7 > 
In a hot strip mill the continuous casted slabs with a thickness of 210 mm are rolled into hot coils with a thickness between 1.25 mm and 12.5 mm. One of the most important characteristics of the steel strip is its surface quality. The surface quality is inspected on several s...
Programme: ECSC-ERGONOM 6C
Record Number: 20547
Last updated on: 1998-07-08
The crane monitoring system 'KRANOMAT' has been developed and installed on a mill crane. KRANOMAT carries out the continuous on-line supervision of essential measured data from the plant to recognise dangerous situations and to relieve the crane operators from supervision task...
Programme: ECSC-ERGONOM 6C
Record Number: 20546
Last updated on: 1998-07-08
In mining operations several hundred kilometres of roadway are headed every year. These roadways are mostly equipped with track systems for the purposes of guided haulage. All the tracks are laid manually, (ie in an ergonomically unfavourable posture, which gives rise to extre...
Programme: ECSC-ERGONOM 6C
Record Number: 20548
Last updated on: 1998-07-08
ID: 7250/12/029
Start date: 1992-01-01, End date: 1994-12-31
The project will identify the ergonomic requirements of a diagnostic system for use on the casthouse floor to measure the level of hot metal in the torpedo cars and calculate the levels of metal and slag in the blast furnace.
Programme: ECSC-ERGONOM 6C
Record Number: 19642
Last updated on: 1994-01-21
ID: 7250/13/054
Start date: 1993-10-01, End date: 1996-09-30
The project will determine and justify, in as far they relate to operator health and safety, the ergonomic requirements for a proposed new system of visual inspection of the surface quality of hot-rolled coil. On the completion of the installation of the new system it will eva...
Programme: ECSC-ERGONOM 6C
Record Number: 19664
Last updated on: 1994-01-21
ID: 7250/13/045
Start date: 1993-12-01, End date: 1993-12-31
The project will concern the ergonomics requirements of the project SACHEM which is an "intelligent" system to aid blast furnace control. The work to be undertaken in the project will be that associated with Stage 2 of the SACHEM project. It will define the associated socio-...
Programme: ECSC-ERGONOM 6C
Record Number: 19656
Last updated on: 1994-01-21
ID: 7250/13/057
Start date: 1993-12-01, End date: 1995-05-31
The project will aim to improve the physical, cognitive and mental wellbeing of operators in a rail finishing installation by integrating in the process of converting and building control cabines the elements needed to take proper account of human factors and the safety of the...
Programme: ECSC-ERGONOM 6C
Record Number: 19667
Last updated on: 1994-01-21
ID: 7250/13/012
Start date: 1991-10-01, End date: 1994-09-30
The project will identify and consolidate in a design specification the ergonomics requirements to assure the health of the workforce and the safe operation of the Sollac Dunkerque Gas Treatment Installation subsequent to its modernisation and extension.
Programme: ECSC-ERGONOM 6C
Record Number: 19625
Last updated on: 1994-01-21
ID: 7250/13/037
Start date: 1992-11-01, End date: 1994-10-31
The project will attempt to determine the ergonomics requirements for - centralised control of computer processes - design of control interfaces in the modernisation of a continuous caster: with special reference to torch cut-off and slab transfer.
Programme: ECSC-ERGONOM 6C
Record Number: 19650
Last updated on: 1994-01-21
ID: 7250/13/009
Start date: 1991-01-01, End date: 1993-12-31
The project will attempt to identify the sources of arduous work in a new method of working steep seams which are amenable to corrective ergonomics measures including: - technical features (working + machine), - characteristics of the operators (physical and psycho-physiolo...
Programme: ECSC-ERGONOM 6C
Record Number: 19622
Last updated on: 1994-01-21
12 3 4 5 6 7 > 
List retrieved on: 2017-10-24
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top