Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (7)

Advanced search

Search projects and results

Results 1 - 7 of 7
Results/page:
1
ID: 7250/12/027
Start date: 1992-06-01, End date: 1995-05-31
The project will aim to define the ergonomic parameters for the design of a monitoring system for a cold rolling process: in particular with respect to - changes in the operatives' working conditions and job content; - possible exposure of operatives to new risk factors whi...
Programme: ECSC-ERGONOM 6C
Record Number: 19640
Last updated on: 1994-01-21
ID: 7250/13/046
Start date: 1992-12-01, End date: 1995-10-31
The aims of this research will be - to develop an innovatory maintenance strategy - to compare this strategy with consolidated practice giving particular regard that different approaches to maintenance affect the frequency and gravity of incidents and accidents. The pur...
Programme: ECSC-ERGONOM 6C
Record Number: 19657
Last updated on: 1994-01-21
ID: 7250/12/028
Start date: 1992-01-01, End date: 1993-12-31
The project will identify the ergonomic requirements of a man-machine interface for a proposed automated system to be installed in a rolling shop: and evaluate these recommendations on a prototype.
Programme: ECSC-ERGONOM 6C
Record Number: 19641
Last updated on: 1994-01-21
ID: 7250/13/042
Start date: 1992-01-01, End date: 1994-05-31
34 rubber-tyred diesel vehicles are currently used for various duties below ground. The objectives of the proposed project are: - in the light of established ergonomic criteria and practical feasibility, to identify the alterations to be made to free steered vehicles used ...
Programme: ECSC-ERGONOM 6C
Record Number: 19654
Last updated on: 1994-01-21
ID: 7250/12/021
Start date: 1992-03-01, End date: 1994-02-28
The project will determine the ergonomic requirements of a measuring system to be used in checking the maintenance state of such items as - overhead cranes - loading cranes - hot-blast stoves particularly ensuring that workers are protected from awkward working positio...
Programme: ECSC-ERGONOM 6C
Record Number: 19634
Last updated on: 1994-01-21
ID: 7250/13/066
Start date: 1993-11-01, End date: 1994-11-30
The reserach will verify the effectiveness, as regards reducing the workload of operatives, of the introduction of a movable tunnel annealing furnace made with ceramic fibres which moves translationally uncovering a fixed area where the pieces to be annealed are placed. The er...
Programme: ECSC-ERGONOM 6C
Record Number: 19676
Last updated on: 1994-01-21
ID: 7250/13/067
Start date: 1993-11-01, End date: 1994-07-31
The aim of the research is to assess the ergonomics advantages to quality control operatives of an ergonomically-designed workstation for the monitoring and processing of dimensions for the purposes of on-line quality inspection. Two situations will be considered which are rep...
Programme: ECSC-ERGONOM 6C
Record Number: 19677
Last updated on: 1994-01-21
1
List retrieved on: 2017-05-26
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top