Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (27)

Country

Belgium (7)
Denmark (2)
France (10)
Germany (13)
Italy (9)
Luxembourg (3)
Netherlands (2)
Spain (4)
United Kingdom (6)

Advanced search

Search projects and results

Results 1 - 10 of 27
Results/page:
12 3 > 
ID: 7215-TP/201
Start date: 1990-04-01, End date: 1993-09-30
The project is iron foil by the applicant's own concerned with the experimental production of patented method-called ELECTROFOIL-based on a technique currently used in the copper industry. A pilot plant similar to an industrial plant but with limited equipment for budgetary re...
Programme: ECSC-STEELDEM 2C
Record Number: 7253
Last updated on: 2002-12-13
ID: 7215-CA/108
Start date: 1990-12-01, End date: 1993-11-30
The aim of the project is to perform the continuous casting of square blooms of high alloy steels up to the size of 265 mm square on the new two-strands horizontal billet caster of the Siegen plant. The originality of this caster is the synchronous oscillation of the twin moul...
Programme: ECSC-STEELDEM 2C
Record Number: 7242
Last updated on: 2002-12-13
ID: 7215-CA/931
Start date: 1989-07-01, End date: 1990-06-30
The aim of this project is to develop a computerised expert system to assist in the operation of an electric arc furnace of 105 tons capacity and 80MW of installed power at Bergavia Works. In this preliminary phase, the process will be analysed in terms of metallurgical, energ...
Programme: ECSC-STEELDEM 2C
Record Number: 6930
Last updated on: 2002-12-13
ID: 7215-GB/201
Start date: 1988-07-01, End date: 1990-06-30
It is aimed to carry out on-line measurements without any contact between the sensor and the strip surface. The measurement is based on the scattering of a reflected light beam due to the surface roughness. The pilot and demonstration project will aim to improve the layout for...
Programme: ECSC-STEELDEM 2C
Record Number: 6926
Last updated on: 2002-12-13
ID: 7215-CA/107
Start date: 1989-04-01, End date: 1991-03-31
The objective of the proposed pilot project is to build and test an on-line analysis system for monitoring and measuring the change in concentration of various elements in liquid steel. The method employed will be laser-induced spectroscopy. The access to the surface of the li...
Programme: ECSC-STEELDEM 2C
Record Number: 6934
Last updated on: 2002-12-13
ID: 7215-GB/303
Start date: 1988-07-01, End date: 1991-06-30
The aim of this programme is to conceive, achieve and experiment at an industrial scale, an inductive strip edge reheating system on a hot strip mill. The 3MW installed power capacity will allow the transverse thermal homogeneity of the strips in front of the finishing mill to...
Programme: ECSC-STEELDEM 2C
Record Number: 6925
Last updated on: 2002-12-13
ID: 7215-CA/201
Start date: 1989-07-01, End date: 1991-06-30
The aim of the project is to evaluate the internal and external quality of stainless steel sheets processed on an existing pilot near net shape casting facility. Grade AISE 304 stainless steel (DIN 4301) produced at ALZ will be remelted and continuously cast into 40 mm thick s...
Programme: ECSC-STEELDEM 2C
Record Number: 6932
Last updated on: 2002-12-13
ID: 7215-CA/901
Start date: 1989-04-01, End date: 1991-03-31
The aim of the project is to develop and operate, on an industrial scale, a new-design electric arc furnace with an attached shaft for continuous scrap loading and scrap preheating. The hot waste gases from the furnace will be sucked through the scrap column of the pre-heater ...
Programme: ECSC-STEELDEM 2C
Record Number: 6931
Last updated on: 2002-12-13
ID: 7215-EA/502
Start date: 1989-07-01, End date: 1991-06-30
After a successful completion of a preceeding pilot project (7215-EB/500) limited to 40 mm flange thickness beams, this project intends to scale-up QST technology to beams with flange-thickness up to and even exceeding 125 mm and a height of 1100 mm. Presently, the yield stren...
Programme: ECSC-STEELDEM 2C
Record Number: 6927
Last updated on: 1994-01-24
ID: 7215-CB/401
Start date: 1989-07-01, End date: 1991-06-30
The project aims to construct and commission an integrated pilot plant consisting of a thin slab continuous caster of Mannesmann Röhrenwerke design linked to an induction furnace and a coiler. The main original feature of the plant consists of a progressive reduction of thickn...
Programme: ECSC-STEELDEM 2C
Record Number: 6928
Last updated on: 2002-12-13
12 3 > 
List retrieved on: 2017-12-16
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top