Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (769)
Report Summary (3)

Country

Austria (14)
Belgium (84)
Denmark (7)
Finland (8)
France (139)
Germany (269)
Greece (8)
Italy (145)
Luxembourg (31)
Netherlands (65)
Portugal (25)
Spain (122)
Sweden (18)
United Kingdom (131)

Advanced search

Search projects and results

Results 1 - 10 of 772
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Inductively coupled plasma mass spectrometry (ICP-MS) is a powerful and, in the meantime, established method for trace and ultra-trace analysis. The aim of this project was to adapt the capabilities of ICP-MS to the needs of the steel industry. For this reason, several Europea...
Programme: ECSC-STEELRES 8C
Record Number: 19964
Last updated on: 1998-03-05
After thermodynamic consideration, a reactive gas mixture with sulphur potential was selected. Investigation on the behaviour of metal-coated steel sheets under such a reactive gas mixture were made at different temperatures and gas compositions by using a device for continuou...
Programme: ECSC-STEELRES 8C
Record Number: 19878
Last updated on: 1998-02-11
The vacuum refining of metal melts is based on the evaporation under vacuum of contaminating solutes which have higher vapour pressures than the vapour pressure of the solvent. The study proved the possibility to refine iron-based melts from copper and tin through the evaporat...
Programme: ECSC-STEELRES 8C
Record Number: 19877
Last updated on: 1998-02-11
ID: 7210-EA/138
Start date: 1992-04-01, End date: 1995-03-31
The aim of this project is to develop optimum hot and cold rolling and continuous annealing practices (steel compositions: 0.15% - 0.3% C; 0.8% - 2.0% Si; 0.8% - 2.0% Mn) to promote "Transformation Induced Plasticity" (TRIP) in which austenite is transformed into hard martensi...
Programme: ECSC-STEELRES 8C
Record Number: 7554
Last updated on: 2002-12-13
ID: 7210-GB/506
Start date: 1991-07-01, End date: 1994-06-30
The aim of this research is an extensive analysis of the loads and deformations of a rolling mill housing during production in order to establish life expectancy. Three stages are foreseen: - Modelling of the rolling mill housing using finite element calculation techniques; - ...
Programme: ECSC-STEELRES 8C
Record Number: 7508
Last updated on: 2002-12-13
ID: 7210-MA/124
Start date: 1992-10-01, End date: 1995-09-30
The project aims at studying the influence of hot/cold rolling and annealing on primary recrystallisation grain structures for non oriented and oriented silicon iron (0.2%Si + Al 6.5%). Hot rolling parameters will be studied on a laboratory hot rolling simulator (MPI) followed...
Programme: ECSC-STEELRES 8C
Record Number: 7419
Last updated on: 2002-12-13
ID: 7210-CB/603
Start date: 1991-04-01, End date: 1994-03-31
This research project, in collaboration with P2742, is intended to study heat transfer and CO and NOx formation, destruction and emission. The project is intended to solve problems of simultaneous CO and NOx emissions using methods which are easily retro- fitted to existing pl...
Programme: ECSC-STEELRES 8C
Record Number: 7572
Last updated on: 2002-12-13
ID: 7210-KB/215
Start date: 1991-07-01, End date: 1994-06-30
This research project will study the impact of environmental factors on the corrosion of mild steel coated with zinc and zinc alloy, by both hot-dipping and electrolytic coating, two types of phosphating and two ranges of paint coatings.
Programme: ECSC-STEELRES 8C
Record Number: 7450
Last updated on: 2002-12-13
ID: 7210-KA/118
Start date: 1991-07-01, End date: 1994-06-30
This research project will investigate microstructural and fracture toughness parameters of HSLA steels in the laboratory. In depth studies will be made of the relationships between monotonic and cyclic loading in view of the importance of these steels in structural engineerin...
Programme: ECSC-STEELRES 8C
Record Number: 7476
Last updated on: 2002-12-13
ID: 7210-EA/136
Start date: 1991-09-01, End date: 1994-08-31
This project consists of studying a method to correct any modification of strip flatness after rolling. Attention will be directed to the residual stresses and localized elongation induced by rolling, coiling and uncoiling operations. This work will allow the negative effects ...
Programme: ECSC-STEELRES 8C
Record Number: 7556
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-10-20
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top