Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 10 of 4097
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
This project provides the tools to assist sawmills in optimizing of maintenance policies. The work has been carried out in the BRITE EURAM III - CRAFT project : MELISSA. This project is aimed at developing decision making means to optimize sawmill maintenance strategy for maxi...
Programme: FP4-BRITE/EURAM 3
Record Number: 22598
Last updated on: 1999-06-02
A primary objective of the COMPETE network was to foster dissemination of projects results by favouring communication between the members of various projects, so that redundancy is minimised and exploitation by similar organisations is improved. Dissemination was also organis...
Programme: FP4-BRITE/EURAM 3
Record Number: 29242
Last updated on: 2003-03-05
The project has demonstrated the possibility of a "world first" measurement technology for measuring the mass flow rate in pneumatic transport systems which has the following features: - No obstruction to flow and highly resistant to abrasion. - Flow regime independent. - Does...
Programme: FP4-BRITE/EURAM 3
Record Number: 27965
Last updated on: 2002-05-30
[REPORT SUMMARY] The FAST system as a whole
The automatic control system for the detection of fabric defects on the loom is based on the application and further development of Near Sensor Image Processing The equipment and the software developed within the FAST Project has been designed to be controlled by low cost com...
Programme: FP4-BRITE/EURAM 3
Record Number: 29205
Last updated on: 2004-05-31
During project CAE-WPS, after stating evaluation criteria, a great number of power circuit topologies have been screened for suitability for welding power supplies. Selections of these have been analysed. Design equations were derived and stress quantities were calculated. Res...
Programme: FP4-BRITE/EURAM 3
Record Number: 27934
Last updated on: 2002-05-23
[REPORT SUMMARY] Design of LinFric® machines
The LinFric® principle is based on hydraulic instead of mechanic actuation. This concept replaces the expensive mechanical gearboxes, which were used in the first generation of linear friction welding machines. To generate the necessary oil-flow of 750l/min a large hydraulic p...
Programme: FP4-BRITE/EURAM 3
Record Number: 27605
Last updated on: 2003-11-17
A photosensitive sol-gel formulation for production of the "wave-guide core" element of silica planar wave-guides was developed. The efficiency with which waveguide cores guide light is highly dependant on the microstructure of the material from which they are produced. The pr...
Programme: FP4-BRITE/EURAM 3
Record Number: 29247
Last updated on: 2003-09-09
MIoTraS is a simulation tool based on the calculation of the mass -and charge transport in diluted electrochemical systems to obtain the ionic current density distribution in 2D and AX-symmetrical cross sections of electrochemical reactors. MIoTraS includes an automatic grid g...
Programme: FP4-BRITE/EURAM 3
Record Number: 31797
Last updated on: 2004-02-03
The first activity was aimed at finding the best polymeric material in order to overcome the defects due to the carbon pick-up which is frequently encountered in the ferrous castings with patterns made of the expandable polystyrene EPS. This problem would be prevented by using...
Programme: FP4-BRITE/EURAM 3
Record Number: 28186
Last updated on: 2002-07-01
In spite of the availability and accuracy of sophisticated 2D and 3D Finite Element methods for simulating the forging process, they do, however, require expertise that may not be available in some (especially) smaller forging companies. Also, they take a considerable amount o...
Programme: FP4-BRITE/EURAM 3
Record Number: 30582
Last updated on: 2003-07-17
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-06-25