Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 10 of 2593
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Final Report Summary - FREEFLOW (The development of a high output processing method for the extrusion of solid thermoplastic sheet and profile)
The main objectives of the project 'The development of a high output processing method for the extrusion of solid thermoplastic sheet and profile' (FLOWFREE) were to: - Develop a prototype extruder that will allow full industrial, commercial development of the process - Develo...
Programme: FP6-SME
Record Number: 52113
Last updated on: 2011-04-14
Kunststoffen mit Mikrowellen trocknen
Die Qualität von Kunststoffprodukten hängt zum Teil von der korrekten Feuchtigkeitim Polymer nach der Verarbeitung ab. Die Forschungsarbeit im Rahmen des europäischen Polydry-Projekts ("The development of an in-line energy efficient polymer microwave based moisture measurement...
Programme: FP6-SME
Record Number: 89553
Last updated on: 2012-10-10
Available languages: DE, EN, ES, FR, IT, PL
Secado de plásticos con microondas
La calidad de los productos de plástico depende en parte de un nivel correcto de humedad en el polímero tras el procesamiento. Las investigaciones del proyecto europeo Polydry han proporcionado un sistema innovador basado en microondas que puede utilizarse con una amplia gama ...
Programme: FP6-SME
Record Number: 89553
Last updated on: 2012-10-10
Available languages: DE, EN, ES, FR, IT, PL
Drying plastics with microwaves
The quality of plastic products depends partly on the correct moisture level in the polymer after processing. Research by the European Polydry project has provided an innovative microwave-based prototype system that can be used on a range of plastics.
Programme: FP6-SME
Record Number: 89553
Last updated on: 2012-10-10
Available languages: DE, EN, ES, FR, IT, PL
Séchage des plastiques par micro-ondes
La qualité des produits en plastique dépend en partie du niveau d'humidité présent dans le polymère après le traitement. Les recherches menées dans le cadre du projet européen Polydry fournissent un prototype novateur de système à base de micro-ondes qui peut être utilisé pour...
Programme: FP6-SME
Record Number: 89553
Last updated on: 2012-10-10
Available languages: DE, EN, ES, FR, IT, PL
Essiccamento della plastica con microonde
La qualità dei prodotti plastici dipende in parte dal corretto livello di umidità nel polimero dopo la lavorazione. La ricerca condotta dal progetto europeo Polydry ha fornito un sistema prototipo innovativo basato sulle microonde che si può usare con diverse plastiche.
Programme: FP6-SME
Record Number: 89553
Last updated on: 2012-10-10
Available languages: DE, EN, ES, FR, IT, PL
Suszenie tworzyw sztucznych mikrofalami
Jakość wyrobów z tworzyw sztucznych zależy częściowo od odpowiedniego poziomu wilgoci w polimerze po obróbce. Badania w ramach europejskiego projektu Polydry doprowadziły do stworzenia innowacyjnego, prototypowego systemu mikrofalowego, który może być używany do wielu tworzyw ...
Programme: FP6-SME
Record Number: 89553
Last updated on: 2013-05-20
Available languages: DE, EN, ES, FR, IT, PL
The development of an in-line energy efficient polymer microwave based moisture measurement and drying system
ID: 513205
Start date: 2004-09-16, End date: 2006-12-31
Industrial ObjectivesThe principle technological objective of this project is to develop a new low cost, rapid, energy efficient microwave basedmoisture measurement and drying system.The prototype development of the microwave based moisture measurement and drying system and th...
Programme: FP6-SME
Record Number: 72291
Last updated on: 2010-11-12
Final Report Summary - POLYDRY (The development of an in-line energy efficient polymer microwave based moisture measurement and drying system)
The overall industrial objective of the project POLYDRY was to develop a new low cost, rapid, energy efficient microwave based moisture measurement and drying system. This would enable in-line, accurate, real-time microwave moisture measurements to control the drying process, ...
Programme: FP6-SME
Record Number: 52085
Last updated on: 2011-04-14
Bleifreie Lötverfahren für die Elektronikbranche
Bleifreies Löten bei der Herstellung flexibler Leiterplatten verursacht potenzielle Fertigungsprobleme, die mit der Temperatur zu tun haben. Die europäische Forschung hat Materialien und Methoden unter die Lupe genommen, um Lösungen zu finden.
Programme: FP6-SME
Record Number: 89453
Last updated on: 2012-09-25
Available languages: DE, EN, ES, FR, IT, PL
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-01-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top