Results 1 - 10 of 16
[REPORT SUMMARY] Final Report Summary - MESMESH (Ultra-thin conductive ceramic mesh to monitor stress and wear on a steel surface)
Executive summary:
Today there are no adequate means of measuring the surface damage done to steel surfaces in industrial machinery like drive shaft's, axels, gears, brake pads, flanges for fixed drilling and grinding machines, dyes for extrusion or moulds for injection mou...
Programme: FP7-NMP
Record Number: 57034
Last updated on: 2013-07-01
ID: HPCF-CT-2001-00126-01
Start date: 2001-09-03, End date: 2001-09-15
Over the few past years, electron, ion and laser beam-induced as well as plasma-based chemical and physical vapor deposition techniques experienced a very rapid growth and now are emerging from laboratories. These techniques appropriate to solve a given surface engineering pro...
Programme: FP5-HUMAN POTENTIAL
Record Number: 59710
Last updated on: 2002-11-05
[PROJECT] POLYTECT - Polyfunctional Technical Textiles against Natural Hazards
ID: 26789
Start date: 2006-09-01, End date: 2010-08-31
Textile structures are extensively used in construction in forms of geotextiles. The retrofitting of existing masonry walls and soil structures is particularly important for earthquake protection of historic buildings and protection of earthworks against landslides. Un-reinfor...
Programme: FP6-NMP
Record Number: 81556
Last updated on: 2010-12-13
[PROJECT] ERACOBUILD - Strategic Networking of RDI Programmes in Construction and Operation of Buildings
ID: 219395
Start date: 2008-11-01, End date: 2012-04-30
ERACOBUILD aims at strengthening and enlarging the strategic networking of RDI programmes in the field of “construction and operation of buildings” initiated in the previous ERABUILD coordination action. ERACOBUILD gathers 34 programme owners or managers coming from 17 EU Mem...
Programme: FP7-NMP
Record Number: 89941
Last updated on: 2017-05-29
[PROJECT] MESMESH - Ultra - thin conductive ceramic mesh to monitor stress and wear on a steel surface
ID: 229099
Start date: 2009-10-01, End date: 2012-10-31
The aim of the project is the development of a pre-commercial prototype mould with built in continuous structural health monitoring. This will be achieved by carrying out research work appropriate for developing femtosecond laser metal processing techniques to produce smooth ...
Programme: FP7-NMP
Record Number: 99936
Last updated on: 2017-05-25
ID: IC15980508
Start date: 1999-01-01, End date: 2002-06-30
Programme: FP4-INCO
Record Number: 47270
Last updated on: 1999-04-20
ID: IC15980501
Start date: 1999-01-01, End date: 2001-12-31
Programme: FP4-INCO
Record Number: 47264
Last updated on: 1999-04-20
ID: IC15980506
Start date: 1999-01-01, End date: 2001-12-31
Programme: FP4-INCO
Record Number: 47269
Last updated on: 1999-04-20
[PROJECT] SMOCAT - Semiconductor metal oxides as high performance catalysts for energetically and environmental improved catalytic combustion of C1-C3 hydrocarbons
ID: IC15980515
Start date: 1999-04-01, End date: 2002-03-31
Programme: FP4-INCO
Record Number: 47275
Last updated on: 1999-04-20
[PROJECT] INTELTEX - Intelligent multi-reactive textiles integrating nano-filler based CPC-fibres
ID: 26626
Start date: 2006-09-01, End date: 2010-08-31
The overall objective of the INTELTEX project is to develop a radically new approach to obtain intelligent textile combining three innovative functions: measurement in a continuous way of mechanical stresses applied to the textile structure, thermal self regulated textile surf...
Programme: FP6-NMP
Record Number: 81541
Last updated on: 2010-09-08
List retrieved on: 2017-07-28
