Results 1 - 10 of 10
1
[REPORT SUMMARY] Extraction of phosphorus and metal contaminants from aged commercial three-way catalysts by using weak organic acid solutions
The developed procedure consists of the use of weak organic acid solutions (citric, oxalic acid) at a low temperature (T=50ºC) to remove phosphorous and other metal contaminants (e.g., Pb, Fe, Cu, Ni, Cr) from a commercial TWC.
The potential application of the described pro...
Programme: FP5-GROWTH
Record Number: 38329
Last updated on: 2006-04-07
[PROJECT] HITEMAG - Novel permanent magnets for high temperature applications
ID: G5RD-CT-2000-00213
Start date: 2000-03-01, End date: 2003-05-31
the aim of this project is the development of new magnetic materials and prototype devices for high temperature applications i.e. up to 450C working temperature. New standards and measurement protocols will also be developed and defined for high temperature permanent magnets. ...
Programme: FP5-GROWTH
Record Number: 51724
Last updated on: 2005-04-12
[PROJECT] REGENCATS - Improvement of ceramic substrate of three-way catalysts (twc) to develop a regeneration and/or reactivation procedure of used catalysts
ID: G5RD-CT-2000-00376
Start date: 2001-02-01, End date: 2004-01-31
The objective of the project is to expand the durability of motor vehicle catalysts by (i) improvements in ceramic support properties and (ii) by regeneration of used catalysts through removal of chemical poisons by dissolving or by extraction and/or reactivation of active sit...
Programme: FP5-GROWTH
Record Number: 54259
Last updated on: 2005-04-12
[PROJECT] MACCSOL - The development and verification of a novel modular air cooled condenser for enhanced concentrated solar power generation
ID: 256797
Start date: 2010-09-01, End date: 2015-02-28
This project will develop and verify a novel modular air cooled condenser (MACC) for concentrated solar power (CSP) plants. This technology will enable CSP plants to increase net power output, and reduce costs compared to existing dry cooled plants. Conventional dry cooling i...
Programme: FP7-ENERGY
Record Number: 95857
Last updated on: 2017-05-26
[PROJECT] NEMESIS - New trends and Market Survey for the end of life of aircrafts. Eco design Guideline
ID: 338534
Start date: 2013-01-01, End date: 2014-06-30
"The current research project deals with the environmental impact, economics and social aspects of the recycling of the materials used for aircaft building. As it has been mentioned the first objective of this proposal is the realization of a market survey on the most importa...
Programme: FP7-JTI
Record Number: 108835
Last updated on: 2015-03-11
[PROJECT] M-ERA.NET - From materials science and engineering to innovation for Europe
ID: 291826
Start date: 2012-02-01, End date: 2016-01-31
M-ERA.NET will be a real tool for developing a strong European RTD community on materials science and engineering and for supporting the European economy with respect to the challenges of the 21st century. M-ERA.NET will be a highly ambitious network involving a majority of E...
Programme: FP7-NMP
Record Number: 102881
Last updated on: 2016-05-09
[PROJECT] REMART - Recycling of Metallic Materials from Rotorcraft Transmissions
ID: 338531
Start date: 2013-04-01, End date: 2015-09-30
The current research project deals with the analysis and validation of the main helicopter power transmissions recycling processes and the design of recycling protocols in order to make them efficient, profitable and environmentally sustainable. This issue is in the domain of...
Programme: FP7-JTI
Record Number: 110479
Last updated on: 2016-04-11
[PROJECT] SELFMEM - Self-Assembled Polymer Membranes
ID: 228652
Start date: 2009-09-01, End date: 2012-08-31
The aim of SELFMEM is to develop innovation in the field of nanoporous membranes. This will be achieved by taking advantage of the self-assembly properties of block copolymers leading to highly porous membranes with adjustable, regular-sized pores of tailored functionalities....
Programme: FP7-NMP
Record Number: 92735
Last updated on: 2017-05-25
[PROJECT] NOESIS - Non-destructive image-based manuscript analysis system
ID: 509145
Start date: 2004-09-01, End date: 2007-08-31
The aim of this project is to produce non-destructive non-invasive image-based processing techniques to aid the historical analysis and examination of five significant Mediterranean collections of manuscripts (hosted by libraries and museums in Egypt, Jord an, Lebanon, Cyprus,...
Programme: FP6-INCO
Record Number: 74214
Last updated on: 2007-06-11
[PROJECT] INFRARTSONIC - Development of a novel and integrated portable non destructive analysis system for the documentation of artworks.
ID: 15338
Start date: 2006-01-01, End date: 2009-06-30
The scope of the project is the development of an integrated non-destructive portable analysis-diagnosis system (called InfrArtSonic) for the 3D sampling and reconstruction of painted artworks. The system will be of a unique and invaluable aid for art hist orians and restorers...
Programme: FP6-INCO
Record Number: 78786
Last updated on: 2009-03-31
1
List retrieved on: 2017-08-02
