Results 1 - 10 of 100
[PROJECT] MORGAN - Materials for Robust Gallium Nitride
ID: 214610
Start date: 2008-11-01, End date: 2011-10-31
The MORGaN project addresses the need for a new materials for electronic devices and sensors that operate in extreme conditions, especially high temperature, high electric field and highly corrosive environment. It will take advantage of the excellent physical properties of d...
Programme: FP7-NMP
Record Number: 89921
Last updated on: 2017-05-29
[PROJECT] MAGDOT - Bridging Atomistic to Continuum - Multiscale Investigation of Self-Assembling Magnetic Dots during Epitaxil Growth
ID: 016447
Start date: 2006-01-01, End date: 2008-12-31
Spontaneous formation of nanostructures through kinetic and thermodynamic morphological instabilities at solid surfaces is increasingly recongnized as an attractive, low-cost alternative to top-down schemes for nanopatterning. We propose an integrated app roach to examine the ...
Programme: FP6-NMP
Record Number: 79826
Last updated on: 2007-07-02
[PROJECT] FIBRECHAIN - Integrated Process Chain for Automated and Flexible Production
of Fibre-Reinforced Plastic Products
ID: 263385
Start date: 2011-06-01, End date: 2014-05-31
Lightweight components and their energy-efficient production will form one of the most important key factors for the European industry to fulfil the ever increasing global demands. Nowadays, for 3D-shaped, multi-layered products based on flexible materials only specialized an...
Programme: FP7-NMP
Record Number: 99121
Last updated on: 2017-05-29
[REPORT SUMMARY] Final Report Summary - DIPOLAR ROTOR ARRAY (Regular Arrays of Artificial Surface-Mounted Dipolar Molecular Rotors.)
In the "Dipolar Rotor Array" project the feasibility of an unprecedented concept was established: preparation of regular two-dimensional arrays of artificial surface-mounted dipolar molecular rotors with very low rotational barriers. Two complementary ways of accomplishing...
Programme: FP7-IDEAS-ERC
Record Number: 179725
Last updated on: 2016-03-11
[REPORT SUMMARY] Laboratory Demonstrator of Novel Sensing Technologies
Optical sensor system for fluorescence lifetime measurement was developed in the project. Sensor uses high sensitive photo multiplier tube (PMT) as detector of fluorescence signal. System is able to use intrinsic and extrinsic sensor probe too. High-speed synchronous principle...
Programme: FP5-GROWTH
Record Number: 40516
Last updated on: 2006-07-03
The Starting Grant ISORI (Ion Spectroscopy of Reaction Intermediates) led to the development of an innovative instrument for studying of mass-selected ions in the gas phase at temperatures close to the absolute zero point (≥ 2.6 K). For exploring the structure of ions, a...
Programme: FP7-IDEAS-ERC
Record Number: 183511
Last updated on: 2016-06-07
Small-angle neutron scattering (SANS) was used in a rather original way for microporosity characterization in functionally graded and laminated Al2O3/Y-ZrO2 ceramics. The porosity characteristics (volume fraction, size distribution, specific surface) of these materials were ob...
Programme: FP5-GROWTH
Record Number: 39595
Last updated on: 2006-02-28
[REPORT SUMMARY] Neutron diffraction characterization of residual stresses in graded AL2O3-ZrO2 ceramics
The main task of the NPI participant in the BIOGRAD project was the neutron diffraction characterization of graded Al2O3/Y-ZrO2 ceramics. Neutron diffraction methods of determination of internal strains and stresses in structural materials have found a lot of applications in m...
Programme: FP5-GROWTH
Record Number: 39586
Last updated on: 2006-02-28
[REPORT SUMMARY] Novel Optical Fibre Formulations
Special silica and glass optical with inverted-graded and step-index fibbers are designed and prepared in the Institute which are employed as substrates for the application of detection layers sensitive to oxygen and glucose.
Commercially available plastic optical fibbers are ...
Programme: FP5-GROWTH
Record Number: 40515
Last updated on: 2006-07-03
[REPORT SUMMARY] Design, manufacture and tests of the coils made of HTS conductors
Two double-pancake coils were wound of the bundle conductor consisting of 7 parallel transposed mutually insulated HTS tapes. Two other double-pancake coils were wound of the bundle conductor consisting of 20 parallel non-transposed non-insulated HTS square wires. Critical cur...
Programme: FP5-GROWTH
Record Number: 42054
Last updated on: 2006-11-14
List retrieved on: 2017-08-02
