Results 1 - 10 of 71
[PROJECT] MORGAN - Materials for Robust Gallium Nitride
ID: 214610
Start date: 2008-11-01, End date: 2011-10-31
The MORGaN project addresses the need for a new materials for electronic devices and sensors that operate in extreme conditions, especially high temperature, high electric field and highly corrosive environment. It will take advantage of the excellent physical properties of d...
Programme: FP7-NMP
Record Number: 89921
Last updated on: 2017-05-29
[PROJECT] SCINTILLA - Scintillation Detectors And New Technologies For Nuclear Security
ID: 285204
Start date: 2012-01-01, End date: 2014-12-31
SCINTILLA aims at building an innovative comprehensive toolbox of devices and best-of-breed technologies for the enhanced detection and identification of difficult to detect radioactive sources and nuclear material: • Dealing with the challenge of masked and shielded material...
Programme: FP7-SECURITY
Record Number: 102073
Last updated on: 2017-06-26
[PROJECT] SIREN - Stability Islands: Performance Revolution in Machining
ID: 340889
Start date: 2014-03-01, End date: 2019-02-28
"Cutting went through a revolution in the 1990s when high-speed milling (HSM) was introduced: the sculpture-like workpieces produced with high precision and efficiency resulted in one order of magnitude less parts in cars/aircrafts, which kept this traditional technology comp...
Programme: FP7-IDEAS-ERC
Record Number: 185440
Last updated on: 2015-03-11
[REPORT SUMMARY] Periodic Report Summary 2 - SIREN (Stability Islands: Performance Revolution in Machining)
Cutting has been considered as primary machining operation for centuries and likely to remain dominant among future machining technologies, too. Cutting went through a revolution in the 1990s when high-speed milling (HSM) was introduced. This has been followed by an...
Programme: FP7-IDEAS-ERC
Record Number: 199469
Last updated on: 2017-06-21
[REPORT SUMMARY] Final Report Summary - NANOINDENT (Creating and disseminating novel nanomechanical characterisation techniques and standards)
Executive summary:
The project NANOINDENT has the aim to gather, improve, catalogue and present characterisation techniques, methods and equipment for nanomechanical testing. European-wide activities coordinated by a virtual centre contributed to a significant improvement o...
Programme: FP7-NMP
Record Number: 55704
Last updated on: 2013-01-18
[PROJECT] Superior pervaporation
ID: G5ST-CT-2001-00321
Start date: 2001-09-18, End date: 2002-04-17
In scaling up the production facility for ceramic pervap membranes Pervatech BV encountered strong variability in performance of the pervap membrane . This is primarily caused by poor quality of the intermediate layers, defects and in homogeneity , before the silica per vapora...
Programme: FP5-GROWTH
Record Number: 61705
Last updated on: 2005-04-12
[PROJECT] EURONIM - European sources of nitride materials
ID: G5RD-CT-2001-00470
Start date: 2001-03-01, End date: 2004-06-30
Euronim will bring Europe in a competitive position in the exponentially developing market of nitride based devices, exhibiting an exceptional range of applications. The goal is to create in EU industrial sources of nitride epitaxial wafers aiming at providing high quality mat...
Programme: FP5-GROWTH
Record Number: 55414
Last updated on: 2005-04-12
ID: G5RT-CT-2001-05023
This proposal addresses the improvement in the commercial position of the European industrial and trade decorative coating sectors while minimizing health, safety and environmental impacts. A thematic network involving 33 RTOs and industrialists from 17 nations has been assemb...
Programme: FP5-GROWTH
Record Number: 72388
Last updated on: 2012-06-12
ID: IC15980806
Start date: 1999-02-01, End date: 2003-01-31
Programme: FP4-INCO
Record Number: 47279
Last updated on: 1999-04-20
[PROJECT] HIT-FCORE - Soft magnetic nanomaterials for high temperature and high frequency functional application in power electronics
ID: G5RD-CT-2001-03009
Start date: 2001-10-01, End date: 2004-09-30
This project aims to develop technology for the production of iron-based amorphous ribbons and nanocrystalline cores. Application of these cores in power electronic devices instead of ferrite or permalloy cores should reduce their weight, overall dimensions, energy consumption...
Programme: FP5-GROWTH
Record Number: 58465
Last updated on: 2005-04-12
List retrieved on: 2017-08-02
