Results 1 - 10 of 121
[PROJECT] SURFSPEC - Theoretical multiphoton spectroscopy for understanding surfaces and interfaces
ID: 279619
Start date: 2011-09-01, End date: 2016-08-31
"The project will develop new methods for calculating nonlinear spectroscopic properties, both in the electronic as well as in the vibrational domain. The methods will be used to study molecular interactions at interfaces, allowing for a direct comparison of experimental obse...
Programme: FP7-IDEAS-ERC
Record Number: 100176
Last updated on: 2015-03-10
[REPORT SUMMARY] Mid-Term Report Summary - SURFSPEC (Theoretical multiphoton spectroscopy for understanding surfaces and interfaces)
The SURFSPEC project has two main objectives: The development of accurate and flexible ab initio methods for the theoretical investigation of nonlinear electronic and vibrational spectroscopies, and the use of these methodologies to obtain insight into the information content...
Programme: FP7-IDEAS-ERC
Record Number: 180202
Last updated on: 2016-04-18
[REPORT SUMMARY] Final Report Summary - FREECATS (Doped carbon nanostructures as metal-free catalysts)
FREECATS is primarily aimed at generating new fundamental knowledge and fostering new prospects and frontiers in the field of catalysis for the sustainable production of chemicals and commodities. New tailored metal-free catalytic architectures are designed...
Programme: FP7-NMP
Record Number: 181722
Last updated on: 2016-03-31
[REPORT SUMMARY] Final Report Summary - SURFSPEC (Theoretical multiphoton spectroscopy for understanding surfaces and interfaces)
When molecules are exposed to light, the will respond to the applied perturbations, either by absorbing the light or by scattering it. These processes allow us to obtain a lot of information about the molecules, their molecular and electronic structure, the electronic and...
Programme: FP7-IDEAS-ERC
Record Number: 197991
Last updated on: 2017-05-12
[REPORT SUMMARY] Final Report Summary - IC2 (Intelligent and Customized Tooling)
The European tooling industry experience that price-based competition is making it increasingly difficult to maintain production in Europe. To be competitive there is a need to develop new and smarter tooling concepts and reorganize the tool makers supply chain based on new...
Programme: FP7-NMP
Record Number: 141036
Last updated on: 2014-07-08
[REPORT SUMMARY] Improved knowledge of ductile iron
Improved knowledge regarding micro-alloying of ductile iron:
Ductile iron has traditionally been classified and standardised according to its strength and ductility. In general the different strength and ductility levels has been achieved by alloying to control the ferrite/pea...
Programme: FP5-GROWTH
Record Number: 33794
Last updated on: 2004-11-04
[REPORT SUMMARY] Multilayer structures (Process)
This result relates to the fabrication of multilayer piezoelectric structures of the new materials developed in PIRAMID. By laminating green sheets of piezoelectric ceramics with printed metal electrodes between the layers, followed by binder burn-out and sintering, piezoelect...
Programme: FP5-GROWTH
Record Number: 36335
Last updated on: 2006-12-06
[REPORT SUMMARY] DEVELOPMENT OF CORROSION RESISTANT COATINGS BY HIGH VELOCITY OXY-FUEL (HVOF) SPRAYING
The main objective of the project has been to establish high velocity oxy-fuel (HVOF) spraying as a new technology for corrosion resistant coatings. State-of-the-art HVOF spraying systems (Diamond Jet and JP5000, representing two of the most widely used commercial systems thro...
Programme: FP4-BRITE/EURAM 3
Record Number: 23334
Last updated on: 1999-11-08
[REPORT SUMMARY] A two-phase model for thermally induced deformation and liquid feeding in the mushy zone
SINTEF and INPG have developed a two-phase model by which the main mechanism for hot tearing formation, i.e., interdendritic melt flow caused by solidification shrinkage, and thermally induced deformation in the entirely solidified parts of the casting and in the solid phase w...
Programme: FP5-GROWTH
Record Number: 36549
Last updated on: 2005-04-12
[REPORT SUMMARY] Development of a new generation of work clothing - establishment of a design tool for extreme work environments
The project aimed to develop a design tool which allowed the development of specialized work clothing of superior quality in a timely and cost efficient manner, based on the knowledge of the existing protective clothing used in the oil industry. The objective was to develop a ...
Programme: FP4-BRITE/EURAM 3
Record Number: 24321
Last updated on: 2000-04-26
List retrieved on: 2017-08-02
