Results 1 - 10 of 168
[PROJECT] PERSUADE - PoroElastic Road SUrface: an innovation to Avoid Damages to the Environment
ID: 226313
Start date: 2009-09-01, End date: 2015-08-31
Low-noise road surfaces are recognized as a cost-effective tool for traffic noise abatement. The best performance can be achieved by optimizing surface texture and porosity. That way, a bottom line of a 3dB lifetime average reduction with respect to ordinary asphalt has been ...
Programme: FP7-ENVIRONMENT
Record Number: 92732
Last updated on: 2017-05-29
[PROJECT] MORGAN - Materials for Robust Gallium Nitride
ID: 214610
Start date: 2008-11-01, End date: 2011-10-31
The MORGaN project addresses the need for a new materials for electronic devices and sensors that operate in extreme conditions, especially high temperature, high electric field and highly corrosive environment. It will take advantage of the excellent physical properties of d...
Programme: FP7-NMP
Record Number: 89921
Last updated on: 2017-05-29
[PROJECT] POPJIM - Plug and Produce Joint Interface Modules
ID: 260048
Start date: 2010-09-01, End date: 2014-08-31
PoPJIM identifies critical performance limiting problems in machine tool design and use. The project idea is based on two crucial innovative solutions: i) replacing conventional machine tool structural joint interfaces by a self configuring and optimising mechatronic module c...
Programme: FP7-NMP
Record Number: 95707
Last updated on: 2017-05-29
[REPORT SUMMARY] Final Report Summary - CERA (Creating ERA in Central Europe)
CERA two-year project was a Specific Support Action (SSA) with a main objective to create synergy for virtual networking and strengthening of the European Research Area (ERA) in Central Europe by networking and twinning the best research centres, organisations and associations...
Programme: FP6-NMP
Record Number: 51849
Last updated on: 2011-04-14
Ship Design and Research Center S.A. was responsible within the Ambio project for a scope of hydrodynamic tests of newly elaborated nanostructured anti-fouling coatings. The objectives concerned: the main surface characteristics of selected coated surfaces, the investigated su...
Programme: FP6-NMP
Record Number: 44968
Last updated on: 2010-03-31
[REPORT SUMMARY] Innovative technology for nano-structured micro parts fabrication by high-density powder metallurgy using nano-phased powder TRIBO materials
Innovative technology for nano-structured mini-parts (power chain bushings and washers) fabrication by high-density powder metallurgy was developed. The technology ensures to achieve density of 7.7-7.75g/cc for powdered steels. Surface nano-structuring was performed by novel i...
Programme: FP5-GROWTH
Record Number: 41096
Last updated on: 2006-09-15
[REPORT SUMMARY] Amore project: p-type high hole mobility ZnO and ZnCrO
-A new method of fabrication of p-type ZnO yielding superior electrical properties was developed. The method relies on oxidation of sputter-deposited Zn(3)N(2) doped with Cr. The x-ray diffraction data confirmed the hexagonal structure of ZnO without inclusion of other phases....
Programme: FP5-GROWTH
Record Number: 33184
Last updated on: 2004-08-20
[REPORT SUMMARY] Growth of GaN/AlGaN wafers for high electron mobility transistor (HEMT) by metaloorganic vapor phase epitaxy (MOVPE)
At UNIPRESS, Intsytut Wysokich Cisnien, two approaches to a design of epitaxial structures forming a base for high power, high frequency GaN/AlGaN transistors have been employed. First one utilizes metaloorganic vapor phase epitaxy (MOVPE) and GaN substrates grown by hydride v...
Programme: FP5-GROWTH
Record Number: 41612
Last updated on: 2006-10-13
[REPORT SUMMARY] High pressure annealing method for modification of structural, optical and electrical properties of Group-II nitride semiconductor structures.
High pressure has proven to be an important tool in nitride technology and research. At atmospheric pressure GaN decomposes at temperatures lower than 1000-1100oC.
High pressure of nitrogen up to 15kbar (1.5GPa) makes it possible to extend the accessible temperature range ...
Programme: FP5-GROWTH
Record Number: 41611
Last updated on: 2006-10-13
[REPORT SUMMARY] Final Report Summary - KMM-NOE (Knowledge-based Multicomponent Materials for Durable and Safe Performance)
The main goal of the KMM-NOE project was to mobilise and concentrate the fragmented scientific potential in the KMM field to create a durable and efficient organism capable of developing leading-edge research while spreading the accumulated knowledge outside the network and en...
Programme: FP6-NMP
Record Number: 47857
Last updated on: 2011-04-14
List retrieved on: 2017-08-02
