Results 1 - 10 of 1712
[REPORT SUMMARY] Analysis and modelling of topologies
During project CAE-WPS, after stating evaluation criteria, a great number of power circuit topologies have been screened for suitability for welding power supplies. Selections of these have been analysed. Design equations were derived and stress quantities were calculated. Res...
Programme: FP4-BRITE/EURAM 3
Record Number: 27934
Last updated on: 2002-05-23
[REPORT SUMMARY] Silica sol-gel formulation # 2
A photosensitive sol-gel formulation for production of the "wave-guide core" element of silica planar wave-guides was developed. The efficiency with which waveguide cores guide light is highly dependant on the microstructure of the material from which they are produced. The pr...
Programme: FP4-BRITE/EURAM 3
Record Number: 29247
Last updated on: 2003-09-09
[REPORT SUMMARY] Pre-expansion and moulding of different type of polymers
The first activity was aimed at finding the best polymeric material in order to overcome the defects due to the carbon pick-up which is frequently encountered in the ferrous castings with patterns made of the expandable polystyrene EPS. This problem would be prevented by using...
Programme: FP4-BRITE/EURAM 3
Record Number: 28186
Last updated on: 2002-07-01
[REPORT SUMMARY] Projection topographer
Potential applications:
- Measurement of the external eye shape (cornea and surrounding sclera).
- Measurement of complex optical lens surfaces.
Potential end-users:
Eye-care practitioners including:
- Optometrists.
- Ophthalmologists.
- Eye surgeons.
- Manufacturers of com...
Programme: FP4-BRITE/EURAM 3
Record Number: 27911
Last updated on: 2002-05-13
Anatomic tibial plates, with four right sizes and 4 left sizes, which cover any necessity, in reference with different tibia dimensions, to avoid plunging in cortical areas, which is the most frequent reason of failures in tibia prostheses.
Joint between Titanium Plate and Po...
Programme: FP4-BRITE/EURAM 3
Record Number: 32762
Last updated on: 2004-08-05
[REPORT SUMMARY] U-value test and building physical test-Test Report 1152
The U values obtained from the test were slightly greater than the theoretical U values. This can be explained by variation in material quality, by heat transfer through the wooden parts of test structure and by heat losses through the space between test structure and metering...
Programme: FP4-BRITE/EURAM 3
Record Number: 28618
Last updated on: 2002-10-21
[REPORT SUMMARY] Manufacture of hollow crankshaft
The manufacture of a hollow crankshaft is a very important achievement in relation to the general aim of weight reduction in the automotive industry: Weight savings achievable are in the order of 15-20% depending on the component to be manufactured. Lost foam technique enables...
Programme: FP4-BRITE/EURAM 3
Record Number: 28189
Last updated on: 2002-07-01
Current implementations of flip chips are mainly based on soldering. The use of conductive adhesives offers several advantages: it is applicable on non-solderable substrates. Interconnection pitch can be much smaller and implementation can be profitable in much smaller product...
Programme: FP4-BRITE/EURAM 3
Record Number: 25467
Last updated on: 2001-02-19
[REPORT SUMMARY] FUPUSET: Fundamental physical chemistry of ultraprecision silicon etching to nanometer dimensions
The aim of the FUPUSET project was to achieve a fundamental physicochemical understanding of the kinetics an mechanism of chemical and electrochemical dissolution of silicon in aqueous KOH with a view to develop the next generation of ultra-high precision anisotropic wet chemi...
Programme: FP4-BRITE/EURAM 3
Record Number: 32666
Last updated on: 2004-07-20
[REPORT SUMMARY] Cycle time reduction through improved intelligent process control of rotational moulding
The project has developed a comprehensive strategy for the reduction of cycle times in the process of rotational moulding. Reductions of up to 50% have been achieved with subsequent productivity gains of 40%. This has been achieved by developing an intelligent control system b...
Programme: FP4-BRITE/EURAM 3
Record Number: 32808
Last updated on: 2004-05-31
List retrieved on: 2017-08-01
