Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP6
All
FP6-SUSTDEV (2)
FP5
All
FP5-EAECTP C (1)
FP5-GROWTH (11)
Other
All
FP4-ENV 2C (2)
FP4-INCO (1)

Content type

Project (20)

Advanced search

Search projects and results

Results 1 - 10 of 20
Results/page:
12 > 
Quality assurance of computational tools for dosimetry
ID: FIGD-CT-2000-20062
Start date: 2000-09-01, End date: 2003-08-31
Computational tools, especially transport codes, are essential for radiation dosimetry. Their quality is generally high,but many casual users do not exploit the full potential of these codes, treat them as black boxes and are prone to erroneous results. These users are seldom ...
Programme: FP5-EAECTP C
Record Number: 52562
Last updated on: 2002-09-10
Josephson arbitrary waveform synthesizer : realisation of a quantum standard for ac voltage (JAWS)
ID: G6RD-CT-2001-00599
Start date: 2001-12-01, End date: 2004-11-30
The problem addressed in this project is the lack of instrumentation and knowledge for accurate and traceable measurement and generation of alternating (AC) voltage with arbitrary waveforms. The objective is to develop a standard that is based on a Josephson Arbitrary Waveform...
Programme: FP5-GROWTH
Record Number: 59955
Last updated on: 2005-04-12
Simulator to test automated non-invasive sphygmomanometer on compliance with the overall system accuracy defined in en 1060-3
ID: G6RD-CT-2002-00706
Start date: 2002-05-01, End date: 2005-07-31
At present, the accuracy of automated non-invasive sphygmomanometers is determined solely in a clinical test as described in the harmonised standard EN 1060. However, the results obtained are of limited value with respect to device performance evaluation. A simulator, which is...
Programme: FP5-GROWTH
Record Number: 62836
Last updated on: 2005-12-09
Metrology in support to precautionary sciences and sustainable development policies
ID: G6RT-CT-2002-05095
Start date: 2002-07-01, End date: 2004-06-30
Metrology is key to sustainable industrial growth and to respond to citizens needs for successful implementation of environmental, health and safety policies. Consideration of the whole information chain relevance, from traceability of data up to the communication of results, ...
Programme: FP5-GROWTH
Record Number: 63524
Last updated on: 2005-04-12
Seismic performance assessment & rehabilitation
ID: G6RD-CT-2001-00525
Start date: 2001-09-01, End date: 2005-02-28
The project aims at mitigating the risk posed by seismically unsafe old RC and masonry buildings: a) by assessing existing and developing new assessment methods and by shedding light into the relation between local failure and global collapse and the seismic performance of hea...
Programme: FP5-GROWTH
Record Number: 57424
Last updated on: 2005-12-09
Thematic network for enforcement practitioners regarding the enforcement of the quid directive by chemical testing
ID: G6RT-CT-2000-05013
Start date: 2001-03-15, End date: 2004-09-14
The European Union currently has, in the Quantitative Ingredients (QUID) Directive, legislation that is unenforceable for technical and socio-economic reasons. The aim is to organize a Law-Enforcernent Practitioners' Laboratories Network to address the technical problems assoc...
Programme: FP5-GROWTH
Record Number: 54979
Last updated on: 2005-04-12
Standardisation of pig carcass classification in the eu through improved statistical procedures and new technological developments (EUPIGCLASS)
ID: G6RD-CT-1999-00127
Start date: 2000-02-01, End date: 2003-11-01
The project will improve the standardization efforts concerning pig carcass classification that means improve methodologies to measure, test and monitor the carcass quality throughout the EU. A high level of standardized classification methods including cheap methods will impl...
Programme: FP5-GROWTH
Record Number: 51397
Last updated on: 2005-04-12
Laser supported cooling system manufacturing in mould production
ID: G6ST-CT-2001-00335
Start date: 2001-10-11, End date: 2002-04-10
Over the long period of mould production, the designers and producers of moulds, as well as molders, are trying to use different technologies for achieving the optimal product quality. Only the integration of modern CAE technologies, rapid prototyping and rapid tooling technol...
Programme: FP5-GROWTH
Record Number: 61737
Last updated on: 2005-04-12
The on-line measurement of surface charge in the paper and textil industries
ID: G6ST-CT-2000-00081
Start date: 2000-05-15, End date: 2001-05-14
Paper & fibre industry in Europe invest huge sums to preserve competitiveness of European productions while meeting ever-stricter environmental standards. Ancillary industries support this with specialised, leading edge technology to improve processes. Surface charge as parame...
Programme: FP5-GROWTH
Record Number: 53824
Last updated on: 2005-04-12
ID: ENV4970413
Start date: 1998-03-01, End date: 2000-02-29
Programme: FP4-ENV 2C
Record Number: 40026
Last updated on: 1998-10-19
12 > 
List retrieved on: 2017-08-02
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top