Results 1 - 10 of 409
[REPORT SUMMARY] Six Sigma workshops - Nissan motor manufacturing, tyne & wear, UK
The Industrial Statistics Research Unit of University of Newcastle-upon-Tyne held an Industrial workshop at Nissan, Tyne and Wear. The idea of this was to bring Manufacturing companies who wished to improve their products and processes through techniques of planned measurement...
Programme: FP5-GROWTH
Record Number: 37139
Last updated on: 2006-12-06
[REPORT SUMMARY] Establishing a pool of European expertise
- Establishing a pool of European expertise:
The pool of European Statistical expertise collected for these deliverable uses the contributors for the state of the art report as the pool.
There are currently discussions ongoing with Wiley publishers looking at the possibili...
Programme: FP5-GROWTH
Record Number: 37158
Last updated on: 2006-12-06
[REPORT SUMMARY] Definition of a standard for footwear protecting against chemicals and micro-organisms
This research project aims to support the development of relevant validated test methods and specifications, under the scope of Directive 89/686/EEC for personal protective equipment (PPE). The main objective is to adapt existing test methods for different kinds of protective ...
Programme: FP5-GROWTH
Record Number: 30559
Last updated on: 2004-01-19
[REPORT SUMMARY] Report on state-of-the-art in measurement
Applying Statistical Methods in Business and Industry the state of the art
Mission Statement:
- To promote the wider understanding and application of contemporary and emerging statistical methods
For Students:
- For people working in business and industry worldwide.
-...
Programme: FP5-GROWTH
Record Number: 37159
Last updated on: 2006-12-06
ISRU held a six-sigma event that was held at Dupont Powder Coatings in Darlington.
There were 17 delegates who attended this event. (Please see attached sheet). All were from different backgrounds such as Human Resources, Quality Management, Finance and Production.
Dave...
Programme: FP5-GROWTH
Record Number: 37141
Last updated on: 2006-12-06
[REPORT SUMMARY] SEC measuring device
The measuring device for the SEC application, consisting of three linear CCD cameras, has been obtained by improvement and optimisation of the existing Krypton K600 type. For brevity's sake it will be referred to, from now on, as K600. Error correction of temperature influence...
Programme: FP5-GROWTH
Record Number: 29945
Last updated on: 2003-06-05
[REPORT SUMMARY] Established links to other statistical groups
The Links to other industrial statistics groups will be useful to all proENBIS members and through their connections with ENBIS to a wider network of statisticians across Europe. These links will be invaluable for future collaborative work and also for help and advice on a wid...
Programme: FP5-GROWTH
Record Number: 37150
Last updated on: 2006-12-06
[REPORT SUMMARY] LCMS methods
Liquid chromatography-mass spectrometry (LC-MS) provides an alternative method for doping control. Presently the AAS are determined after hydrolysis of AAS conjugates by GC-MS. However, the GC-MS method is time-consuming and faster methods are required. Furthermore, the sensit...
Programme: FP5-GROWTH
Record Number: 36353
Last updated on: 2005-04-12
[REPORT SUMMARY] TOFD procedure for weld inspection
The TOFDPROOF project is an integrated approach to allow for the introduction of TOFD method as a stand alone NDT technique for detection and sizing of defects in carbon steel welds at the manufacturing stage.
The project is co-normatif and aims at completing the European sta...
Programme: FP5-GROWTH
Record Number: 43380
Last updated on: 2008-08-20
[REPORT SUMMARY] Industrial case studies (D12)
The utility of the reference materials and standard guides has been demonstrated via a set of industrial case studies from the aerospace, automotive and electronics industries. This is being disseminated through the technical and scientific literature.
Programme: FP5-GROWTH
Record Number: 39653
Last updated on: 2006-02-28
List retrieved on: 2017-08-02
