Results 1 - 6 of 6
1
[PROJECT] NANOXCT - Compact X-ray computed tomography system for non destructive characterization of nano materials
ID: 280987
Start date: 2012-05-01, End date: 2015-04-30
Within the past decades, advances in miniaturization from micro to nano-scale have had dramatic impacts on our lives. Consumer electronics, which once occupied large volumes, now fit in the palm of a hand. But nanotechnology does not only improve in electronics. Also material...
Programme: FP7-NMP
Record Number: 103331
Last updated on: 2016-04-11
[PROJECT] SONO - A pilot line of antibacterial and antifungal medical textiles based on a sonochemical process
ID: 228730
Start date: 2009-10-01, End date: 2013-09-30
Hospital-acquired (nosocomial) infections are a major financial issue in the European healthcare system. The financial impact of these infections counteract medical advances and expensive medical treatments by increasing the length of hospital stay by at least 8 days on avera...
Programme: FP7-NMP
Record Number: 92784
Last updated on: 2017-05-25
[PROJECT] NANOPV - Nanomaterials and nanotechnology for advanced photovoltaics
ID: 246331
Start date: 2011-03-01, End date: 2014-02-28
The NanoPV project aims at making a breakthrough step-change in photovoltaics by the removal of a set of bottlenecks which have been identified to block the application of nanostructures for high-efficiency, low-cost solar cells. The bottlenecks arise from the present lack of...
Programme: FP7-NMP
Record Number: 97983
Last updated on: 2017-05-25
[PROJECT] NAPOLYNET - Setting up research intensive clusters across the EU on characterization of polymer nanostructures
ID: 218331
Start date: 2008-04-01, End date: 2011-03-31
NaPolyNet is a 36-month project involving 16 partners from 10 European countries. The objectives are: 1. to network at regional, national and international level with experts on the characterization of polymer nanostructured materials in the field of packaging, textiles and m...
Programme: FP7-NMP
Record Number: 86594
Last updated on: 2017-05-29
[PROJECT] SNM - Single Nanometer Manufacturing for beyond CMOS devices
ID: 318804
Start date: 2013-01-01, End date: 2017-03-31
To extend beyond existing limits in nanodevice fabrication, new and unconventional lithographic technologies are necessary to reach Single Nanometer Manufacturing (SNM) for novel 'Beyond CMOS devices'. Two approaches are considered: scanning probe lithography (SPL) and focuse...
Programme: FP7-ICT
Record Number: 104931
Last updated on: 2017-04-25
[PROJECT] CO-NANOMET - COordination of NANOMETrology in Europe
ID: 218764
Start date: 2009-01-01, End date: 2010-12-31
Nanotechnology has the ability to become the most promising technology advance for the 21st Century. It offers a huge potential of applications and economic benefits, which may contribute to the European economy. Scientifically and economically, nano-metrology is an indispens...
Programme: FP7-NMP
Record Number: 89940
Last updated on: 2017-05-25
1
List retrieved on: 2017-08-02
