Results 1 - 10 of 182
[REPORT SUMMARY] Testing initiative for global requirements on magnetic and integrated circuit cards systems
Card systems are used today in the core of important applications that have become normal for us: identification, credit, telecommunications, health or transport among others. Until recently, systems based on integrated circuit (IC) cards (ICC) were mainly local experiences wi...
Programme: FP4-SMT
Record Number: 21866
Last updated on: 1998-11-25
[REPORT SUMMARY] Biosensors for use in routine assays to meet industrial needs; BRAIN
Successful laboratory and industrial validations have been completed for glucose, sucrose, lactose, fructose and lactic acid measurements. Very promising results have been obtained for the ethanol biosensor but its shelf life has not been optimised. These biosensors have been ...
Programme: FP4-SMT
Record Number: 25750
Last updated on: 2001-01-19
[REPORT SUMMARY] ABSODIAM: system for the measurement very thin wire diameters
The results of the project show the capacity of the ABSODIAM system to measure absolute diameter of very thin wires in the range 10 to 200 µm using the new theoretical formula developed by the partners with the requested accuracy. Moreover Invar reference wires have been produ...
Programme: FP4-SMT
Record Number: 20930
Last updated on: 1998-10-01
[REPORT SUMMARY] On line monitoring of metallic contamination in silicon (OMMCOS)
Traditionally, for analysis of metallic impurities, techniques such as atomic absorption spectroscopy (AAS) combined with vapour phase decomposition (VPD) have been employed.
However, in order to monitor on-line metallic contamination in silicon, new analytical strategies ar...
Programme: FP4-SMT
Record Number: 21662
Last updated on: 2003-10-09
[REPORT SUMMARY] Pilot studies of CEN protocols for evaluating the emission of airborne hazardous substances from machines
In this large two-part project, we have investigated and developed a number of methods for measuring the emission rates of pollutants from machines covering particulate and gaseous pollutants, a wide range of machines, in both test houses and the real workplace. We have achiev...
Programme: FP4-SMT
Record Number: 29245
Last updated on: 2003-03-05
[RESULT IN BRIEF] Schutz von Arbeitnehmern vor schädlichen Luftschwebstoffen
Personen, die über längere Zeit giftigen Gasen und schädlichen Luftschwebstoffen ausgesetzt sind, müssen mit Gesundheitsschäden rechnen. Neue, standardisierte Verfahren helfen den Herstellern künftig beim Bau von besseren Maschinen, die geringere Mengen dieser gefährlichen Substanzen freisetzen.
Programme: FP4-SMT
Record Number: 81019
Last updated on: 2005-09-18
[RESULT IN BRIEF] Protection de la main d'oeuvre face aux particules nocives en suspension dans l'air
L'exposition intensive à des gaz et particules polluants en suspension dans l'air peut avoir des effets néfastes sur la santé. De nouvelles méthodes standardisées vont aider les industriels à concevoir de meilleures machines, émettant moins de substances nocives.
Programme: FP4-SMT
Record Number: 81019
Last updated on: 2005-09-18
[RESULT IN BRIEF] Protecting the workforce from harmful airborne particles
Extended exposure to airborne pollutant gases and particles can lead to adverse health effects. New standardised methods will help manufacturers design better machines producing fewer emissions of these harmful substances.
Programme: FP4-SMT
Record Number: 81019
Last updated on: 2005-09-18
[RESULT IN BRIEF] Protegiendo al trabajador de partículas aerotransportadas peligrosas
La exposición prolongada a gases y partículas contaminantes aerotransportadas puede producir efectos adversos en la salud. Los nuevos métodos normalizados ayudarán a los fabricantes a diseñar máquinas mejores que produzcan menos emisiones de estas sustancias dañinas.
Programme: FP4-SMT
Record Number: 81019
Last updated on: 2005-09-18
[RESULT IN BRIEF] Tutela dei lavoratori contro i dannosi effetti del particolato nocivo
L'intensa esposizione alle particelle inquinanti e ai gas sospesi nell'aria può esercitare un effetto nocivo sulla salute. Nuovi metodi normalizzati contribuiranno alla realizzazione di macchinari migliori, capaci di ridurre le emissioni di queste sostanze nocive.
Programme: FP4-SMT
Record Number: 81019
Last updated on: 2005-09-18
List retrieved on: 2017-08-04
