Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP6
All
FP6-IST (10)
FP6-NMP (53)

Country

Belgium (3)
Denmark (2)
Finland (1)
France (6)
Germany (12)
Hungary (1)
Ireland (1)
Israel (1)
Italy (5)
Lithuania (1)
Netherlands (5)
Norway (1)
Poland (1)
Slovenia (1)
Spain (6)
Sweden (1)
Switzerland (1)
Turkey (1)
United Kingdom (13)

Advanced search

Search projects and results

Results 1 - 10 of 63
Order by: Results/page:
12 3 4 5 6 7 > 
Final Report Summary - POLYCOND (Creating competitive edge for the European POLYmer processing industry driving new added-value products with conducting polymers)
POLYCOND was an Integrated project (IP) with strong focus on the compounding of engineering polymers and Inherently conductive polymers (ICPs) with improved conductivity, or hybrid systems of ICPs with conductive nanotubes. Innovative, eco-efficient processing, based on CO2 as...
Programme: FP6-NMP
Record Number: 52037
Last updated on: 2012-10-03
Final Report Summary - GANANO (New Generation of GaN-based sensor arrays for nano- and pico-fluidic systems for fast and reliable biomedical testing)
Hospitals and medical laboratories have to analyse thousands of tiny samples on a daily basis. This is ideally carried out quickly, efficiently and with a high degree of sensitivity, enabling early detection of conditions such as AIDS, Creutzfeldt-Jakob disease and cancer. Rap...
Programme: FP6-NMP
Record Number: 51679
Last updated on: 2012-10-03
Final Report Summary - ECOBINDERS (Furan and lignin based resins as eco-friendly and durable solutions for wood preservation, panel, board and design products)
The aim of the 'Furan and lignin based resins as eco-friendly and sustainable solutions or durable wood, panel & board and design products' project (Ecobinders) was to develop novel environmentally friendly binders derived from natural raw materials, more specifically, lignins...
Programme: FP6-NMP
Record Number: 46615
Last updated on: 2012-10-03
Final Report Summary - N2T2 DEVICES (Novel Nano-Template Technology And Its Applications To The Fabrication Of Novel Photonic Devices)
At the time of writing the N2T2 proposal there were few if any reports of true wafer-scale nano-imprinting, as the techniques reported relied on stepping and repeating a hard master usually generated by electron beam lithography. The combination of self-ordered and highly orde...
Programme: FP6-NMP
Record Number: 46779
Last updated on: 2012-10-03
Final Report Summary - DIGIMAT (Multiscale modelling of recrystallization in metals based on a digital material framework)
Main results for the DIGIMAT project include: - A DigiMicro software has been developed for constructing, visualising and analysing three-dimensional (3D) microstructures. Two formats are available: Voronoï tessellations and voxels. - Meshing methods that conform to microstru...
Programme: FP6-NMP
Record Number: 46956
Last updated on: 2012-10-03
Final Report Summary - NANOMESO (Size Effects in Mechanical Properties)
NANOMESO was a multidisciplinary team of leading European and United States (US) experts in modelling and experiments. Driven by recent striking experimental observations of size dependent plasticity demonstrating the inappropriateness of current plasticity theories, the team ...
Programme: FP6-NMP
Record Number: 46930
Last updated on: 2012-10-03
Final Report Summary - POLYTECT (Polyfunctional Technical Textiles against Natural Hazards)
Textile materials are extensively used in construction. In geotechnical applications, these materials provide reinforcement for slopes, retaining structures, roadways, embankments, as well as various drainage structures. In masonry applications, textiles are growing in importa...
Programme: FP6-NMP
Record Number: 53037
Last updated on: 2012-06-07
Final Report Summary - LAUNCH-MICRO (Microtechnologies for re-launching European machine manufacturing SMEs)
The LAUNCH-MICRO project aimed to accomplish the following objectives: 1. provide European machine tool Small and medium enterprises (SMEs) with the necessary technical knowledge and related methodologies for the construction of ultra-precision manufacturing equipment; 2. ...
Programme: FP6-NMP
Record Number: 52973
Last updated on: 2011-11-03
Final Report Summary - SANES (Integrated self-adjusting nano-electronic sensors)
Carbon nanotubes demonstrated in the past decade that their exciting electronic and mechanical properties make them one of the most promising materials of the 21st century. The absorption of atoms or molecules on the outer walls of carbon nanotubes can affect their properties,...
Programme: FP6-NMP
Record Number: 46776
Last updated on: 2011-11-03
Final Report Summary - DIGITEX (Digital Programmed Jetting of Fluids for Multifunctional protective Textiles)
The DIGITEX project was started in 2006 to explore the use of inkjet technology in the textile industry to replace existing analogue production processes such as coating processes, dyeing processes and finishing processes. Next to that the project aimed to seek for new product...
Programme: FP6-NMP
Record Number: 52947
Last updated on: 2011-11-03
12 3 4 5 6 7 > 
List retrieved on: 2017-11-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top