Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 6 of 6
Order by: Results/page:
1
Active tilting three wheeled vehicle chassis
The result describes development of a tilting three wheeled chassis to enable small wheeltrack, with one wheel at the front and two at the rear. The main vehicle cabin tilts with the front wheel using an active control system operating hydraulic actuators. Potential applicati...
Programme: FP5-GROWTH
Record Number: 43602
Last updated on: 2007-04-20
Multichannel Reactor System
[REPORT SUMMARY] Multichannel Reactor System
Experiments are performed in a structured packed bed reactor that has been developed for the selective oxidation of organic liquids to produce pharmaceutical products. Molecular oxygen is used as the oxidant, providing a cleaner processing route, than in established methods. T...
Programme: FP5-GROWTH
Record Number: 40544
Last updated on: 2006-07-03
Food industry and surface tension of stainless steel
This part of the project analysed the relationships between the basic component of the surface tension (gamma) of stainless steel and: - The build up of calcium phosphate deposits in the presence and in the absence of citrates; - The initial adhesion of whey proteins, - T...
Programme: FP5-GROWTH
Record Number: 35939
Last updated on: 2005-03-14
The rotating disk apparatus proved to be a reliable and fast method to study the influence of the surface material on the deposition process
The rotating disk apparatus showed to be a very useful tool for predicting fouling results in a faster and easier way, because the results obtained in the heat flow cell follow the same trend as those obtained for this equipment.
Programme: FP5-GROWTH
Record Number: 35942
Last updated on: 2005-03-14
The presence of a biofilm on the surface masks the effect of surface material on the deposition process, but it increases the total mass of deposit (SMUF plus biological deposit)
Tests carried out with biofilm and SMUF deposits showed that the biological layer masked the differences between the different surfaces but, at the same time, increased the amount of total deposit formed. Also, no significant differences were found between the number of total ...
Programme: FP5-GROWTH
Record Number: 35941
Last updated on: 2005-03-14
Quantification of the relationships between the basic component of the surface tension (gamma) of stainless steel and the initial formation of calcium phosphate and/or protein deposits
The effect of the surface on the deposition behaviour of calcium phosphate was quantified in the presence and absence of protein as well as in the presence and absence of citrates. It was concluded that surfaces having lower values of Gamma- promote the formation of less and b...
Programme: FP5-GROWTH
Record Number: 35940
Last updated on: 2005-03-14
1
List retrieved on: 2017-11-19
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top