Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Austria (8)
Belgium (98)
Denmark (56)
Finland (8)
France (245)
Germany (255)
Greece (51)
Iceland (1)
Ireland (48)
Italy (153)
Luxembourg (5)
Netherlands (83)
Norway (5)
Portugal (57)
Spain (108)
Sweden (13)
Switzerland (13)
United Kingdom (234)

Advanced search

Search projects and results

Results 1 - 10 of 378
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: BREU0263
Start date: 1990-09-01, End date: 1993-08-31
In the proposal, schemes for the adaptation of excimer laser processing, technology for plastics and flexible material industries will be examined; in order to promote the introduction of high power excimer laser technology in industries dealing with flexible materials.
Programme: FP2-BRITE/EURAM 1
Record Number: 3217
Last updated on: 2003-02-13
ID: BREU0430
Start date: 1991-10-01, End date: 1994-09-30
Polyethylene terephthalate (PET) is extensively used for the production of bottles for water and beverages and other edible products. In this project recovered PET will be modified through blending. The PET blends will be suitable substitutes to virgin HDPE and PVC in the pro...
Programme: FP2-BRITE/EURAM 1
Record Number: 4037
Last updated on: 2003-02-13
ID: BREU0129
Start date: 1990-05-01, End date: 1994-04-30
The aim is to develop a new family of MMCs based on A1/high Si alloys.
Programme: FP2-BRITE/EURAM 1
Record Number: 897
Last updated on: 1999-08-06
ID: BREU0130
Start date: 1990-07-01, End date: 1993-12-31
The aim of the project is to provide a basis for extended use of the life potential of existing and future advanced aero-engine fracture critical parts (e.g. disks).
Programme: FP2-BRITE/EURAM 1
Record Number: 898
Last updated on: 1998-11-27
ID: BREU0491
Start date: 1992-01-01, End date: 1994-12-31
This project starts from Bisiach and Carru's existing Mobile Gantry Robot. Their big, 3 polar-axes, hollow-head robot was originally devised for spot-welding, with a huge structure, a big operating volume (about 600 m3) and many specific features for this process. This is th...
Programme: FP2-BRITE/EURAM 1
Record Number: 4237
Last updated on: 1998-11-25
ID: BREU0546
Start date: 1992-01-01, End date: 1994-12-31
New optical composite materials are needed to obtain a dynamic control of light and energetic transmission properties of glazed systems. Electro-Chronism (EC) is a promising technique to obtain variable transmittance, or different colours, by electric voltage switching. Neve...
Programme: FP2-BRITE/EURAM 1
Record Number: 4215
Last updated on: 1998-11-25
ID: BREU0461
Start date: 1991-12-01, End date: 1995-12-01
Since its introduction in 1969, wire-ED cutting with a continuous wire electrode has achieved a monopoly position in toolmaking as well as in series production of aerospace components. The process allows virtually force-free fully-automated processing of electrically conducti...
Programme: FP2-BRITE/EURAM 1
Record Number: 4047
Last updated on: 1998-11-10
ID: BREU0155
Start date: 1990-06-01, End date: 1994-05-31
The industrial use of some materials (high strength steels, super alloys and ceramics) is at present limited due to their poor machinability. Preliminary studies on LAM have shown that cutting force reductions of from 20 to 50% have been obtained on Inconel type alloys and h...
Programme: FP2-BRITE/EURAM 1
Record Number: 919
Last updated on: 1998-11-10
ID: BREU0540
Start date: 1992-01-01, End date: 1994-12-31
To develop conditions of surface preparation for advanced techniques of soldering and adhering in electronic circuitry.
Programme: FP2-BRITE/EURAM 1
Record Number: 4211
Last updated on: 1998-11-10
ID: BREU0160
Start date: 1990-06-01, End date: 1993-05-31
-to develop a fully integrated surface mounting technology which is highly reliable and therefore cost effective. This is to be done by integration of the pick and placement and the laser soldering action in one process step (fault rates less than 100 ppm) -to identify and op...
Programme: FP2-BRITE/EURAM 1
Record Number: 924
Last updated on: 1998-11-10
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-11-18
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top