Results 1 - 10 of 323
[PROJECT] Idealist2011 - Trans-national cooperation among ICT National Contact Points
ID: 231367
Start date: 2008-10-01, End date: 2011-09-30
The main objective of Idealist2011 is reinforcing the network of National Contact Points (NCP) for ICT under FP7, by promoting further trans-national cooperation within this network. Thiscooperation will not be reduced to only ICT NCPs but also a degree of collaboration and n...
Programme: FP7-ICT
Record Number: 89033
Last updated on: 2017-04-19
[PROJECT] ISTOK-SOYUZ - Information Society Technologies to Open Knowledge for Eastern Europe and Central Asia
ID: 231665
Start date: 2009-01-01, End date: 2011-06-30
The ISTOK-SOYUZ project, based on the sound outcomes and lessons learnt of the ISTOK.Ru project www.istok-ru.eu implemented in Russia in 2006-2008, will expand the ISTOK experience to the Eastern Europe & Central Asia countries, identifying and promoting visibility of mutual ...
Programme: FP7-ICT
Record Number: 89490
Last updated on: 2017-04-18
[PROJECT] EXTEND - Extending ICT research co-operation between the European Union, Eastern Europe and the Southern Caucasus
ID: 231137
Start date: 2009-01-01, End date: 2011-06-30
The European Union promotes the scientific and technological co-operation with the Eastern European and Southern Caucasus (EESC) countries, aiming firstly to restore and reinforce their research capacity and secondly to integrate them in the European Research Area. The Sevent...
Programme: FP7-ICT
Record Number: 89480
Last updated on: 2017-04-13
[PROJECT] SCUBE-ICT - Strategic Cooperation between Ukraine, Belarus and EU in Information and Communication Technologies
ID: 231148
Start date: 2009-01-01, End date: 2010-12-31
EU, Belarus and Ukraine face common ICT R&D opportunities and challenges that create a favourable environment for strategic collaboration. The main aim of SCUBE-ICT is to increase co-operation between ICT researchers from the three regions.
The project will achieve its ov...
The project will achieve its ov...
Programme: FP7-ICT
Record Number: 89481
Last updated on: 2017-04-13
[PROJECT] INTAS 2004-79-7165 - Patterns of migration in the new European Borderlands: an assessment of post-enlargement migration trends in NIS border countries (Armenia, Belarus, Georgia, Moldova and Ukraine)
ID: INTAS 2004-79-7165
Start date: 2005-10-01, End date: 2007-09-30
The Enlargement of the EU in 2004 lead to the incorporation of 10 new member states, 8 of them bordering NIS countries. This has created a new borderland between East and West with new kinds of flows of good, people and capital across the borders and especially within the bord...
Programme: IC-INTAS
Record Number: 86012
Last updated on: 2017-03-16
[PROJECT] INTAS 2005-1000006-8441 - Organizing and representing post-communist nations: the role of capital cities
ID: INTAS 2005-1000006-8441
Start date: 2006-11-01, End date: 2008-10-31
The scientific objective of this project, intended to take place over 24 months, involving 4 research teams ( 2 research teams from 2 NIS countries and 2 research teams from 2 INTAS countries), is to understand how and to explain why the new capital cities of post-Soviet state...
Programme: IC-INTAS
Record Number: 86068
Last updated on: 2017-03-16
[PROJECT] INTAS 2004-78-7308 - Development of a position sensitive detector for PET, CT and Gamma cameras with improved sensitivity and spatial resolution
ID: INTAS 2004-78-7308
Start date: 2006-07-01, End date: 2008-06-30
The main objectives of this project are: 1) Perfection of growing technology of (Lux-Y1-x)AlO3:Ce crystals with 0.2 and 0.7 lutetium content in (Lu-Y) system. 2) Development of Gamma Camera and PET/CT detector prototypes based on (Lux-Y1-x)AlO3:Ce crystals. Research activities...
Programme: IC-INTAS
Record Number: 86003
Last updated on: 2017-03-16
[PROJECT] INTAS 2005-1000008-7940 - Multifunctional composite coatings for dry machining and metal forming technologies
ID: INTAS 2005-1000008-7940
Start date: 2006-08-01, End date: 2008-07-31
Advances in machining technologies (dry machining, high speed machining, etc.) and wide applications of new materials (titanium, superalloys, composites, etc.) increased the complexity of cutting and forming operations and place extreme requirements to cutting and forming too...
Programme: IC-INTAS
Record Number: 86093
Last updated on: 2017-03-16
[PROJECT] INTAS 2005-1000008-7801 - Electromagnetics of nanostructures
ID: INTAS 2005-1000008-7801
Start date: 2006-10-01, End date: 2008-09-30
The Project aims at the elaboration of a general approach to the description of electromagnetic processes in different nanostructures, theoretical investigation of their electromagnetic properties, and development of a physical basis for utilization of these properties in nove...
Programme: IC-INTAS
Record Number: 86071
Last updated on: 2017-03-16
[PROJECT] INTAS 2005-1000008-8024 - Ground-based and space-borne multiple scattering lidar returns from arbitrary oriented particles including polarization considerations and wide-angle imaging
ID: INTAS 2005-1000008-8024
Start date: 2006-12-01, End date: 2009-05-31
The objective of the project is to combine the separated analytical and experimental data concerning lidar sounding of clouds into a self-consistent theory. This theory will contain the new analytical and numerical methods for solutions to the direct scattering problems where ...
Programme: IC-INTAS
Record Number: 86105
Last updated on: 2017-03-16
List retrieved on: 2017-07-24
