Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Austria (1)
Belgium (4)
Denmark (1)
Finland (7)
France (11)
Germany (17)
Italy (14)
Luxembourg (6)
Netherlands (3)
Spain (24)
Sweden (5)
United Kingdom (11)

Advanced search

Search projects and results

Results 1 - 10 of 23
Order by: Results/page:
12 3 > 
ID: 7210-PR/222
Start date: 2000-07-01, End date: 2003-12-31
Hot rolled high strength steels possessing improved resistance to perforation corrosion are available in Japan for supply to subframe / under body parts. However some work indicates that they may be prone to pitting corrosion with subsequent detrimental to fatigue life. The ob...
Programme: ECSC-STEEL C
Record Number: 66482
Last updated on: 2002-12-13
ID: 7210-PR/304
Start date: 2001-07-01, End date: 2004-06-30
The aim of this project is to improve the deep drawability by controlling of the austenite stability, the strain hardening behaviour, the texture and the surface topography in order to enable new applications for austenitic steels, e.g. in the automotive industry.
Programme: ECSC-STEEL C
Record Number: 66563
Last updated on: 2002-12-13
ID: 7210-PR/242
Start date: 2000-07-01, End date: 2003-12-31
The automotive "body-in-white" structure has been traditionally fabricated by using press formed components. The demand for increased crash safety and greater mass efficiency has led to the extensive substitution of traditional mild steel with higher strength products. This pr...
Programme: ECSC-STEEL C
Record Number: 66502
Last updated on: 2002-12-13
ID: 7210-PR/246
Start date: 2000-07-01, End date: 2003-12-31
Cold forming and hole punching are two processes that offer flexibility to the designer and fabricator. However, guidance on cold forming is currently limited to qualitative information related to the suitability of the material while hole punching is subject to severe restric...
Programme: ECSC-STEEL C
Record Number: 66506
Last updated on: 2002-12-13
ID: 7210-PR/311
Start date: 2001-07-01, End date: 2004-06-30
Concerning the cost reductions and increased safety, crash-tests are the most appropriate for appreciating global improvement. Steel-makers need simpler dynamic testing for the evaluation of the steels characteristics, particularly of welds (spot or LASER joints). Furthermore,...
Programme: ECSC-STEEL C
Record Number: 66570
Last updated on: 2002-12-13
ID: 7210-PR/254
Start date: 2000-07-01, End date: 2003-06-30
The development of steel frame modular buildings is gaining increased interest throughout Europe. Lightweight steel frame structures are used in partitions and suspended ceilings and for load-bearing structures of rack-storage buildings or domestic houses. Currently there are ...
Programme: ECSC-STEEL C
Record Number: 66514
Last updated on: 2002-12-13
ID: 7210-PR/065
Start date: 1997-07-01, End date: 2000-12-31
The prime objective of this research project is to develop a process enabling continuously produced hot dip galvanised (HDG) and galvannealed (GA) materials to be produced using the same bath chemistry. The second objective is to investigate a variety of additives in the spelt...
Programme: ECSC-STEEL C
Record Number: 66791
Last updated on: 2002-12-13
ID: 7210-PR/183
Start date: 1999-09-01, End date: 2002-08-31
Lateral torsion buckling is a complex instability phenomenon that is likely to occur in members subject to predominant bending about the strong axis of their cross-section. Though this phenomenon is likely to occur once the constructions are completed, it is mostly of paramoun...
Programme: ECSC-STEEL C
Record Number: 66910
Last updated on: 2002-12-13
ID: 7210-PR/355
Start date: 2002-07-01, End date: 2005-06-30
The aim of the project is to study the mechanism by which boron additions influence the development of austenitic and ferritic grain structures in heat treatable and plain C-Mn steels (0.005-0.2%C) during and following thermal and mechanical processing. In addition the effect ...
Programme: ECSC-STEEL C
Record Number: 66614
Last updated on: 2002-12-13
ID: 7210-PR/342
Start date: 2002-07-01, End date: 2005-06-30
Failure mode and effects analysis is a systematic methodology used to find out the sources and consequences of failures in the operation of technical processes and to improve the quality management. Another approach can be described as a combination of a powerful process datab...
Programme: ECSC-STEEL C
Record Number: 66601
Last updated on: 2002-12-13
12 3 > 
List retrieved on: 2017-11-19
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top