Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Belgium (1)
France (3)
Germany (3)
Italy (4)
Luxembourg (3)
Netherlands (2)
Spain (13)
United Kingdom (2)

Advanced search

Search projects and results

Results 1 - 10 of 13
Order by: Results/page:
12 > 
ID: 7210-TS/101
Start date: 1995-07-01, End date: 1998-12-31
The aim of this project is to produce pre-finished steel sheet with metallic coatings and - compared with conventional materials - significantly improved application-related properties (corrosion, forming, and joining behaviour and paintability) by means of galvannealing steel...
Programme: ECSC-STEELRES 8C
Record Number: 28871
Last updated on: 2002-12-13
ID: 7210-GB/410
Start date: 1993-07-01, End date: 1995-06-30
The three partners involved in this project intend to develop a method for identifying and classifying defects encountered in flat products, and then to test the method under industrial conditions. The computer-based system to be used shall be based on a neural network capable...
Programme: ECSC-STEELRES 8C
Record Number: 23248
Last updated on: 2002-12-13
ID: 7210-SA/522
Start date: 1994-07-01, End date: 1998-06-30
The aim of this research is to collect and complete existing worldwide know-how in natural fire engineering in order to form a consistent state of the art Natural Fire Safety Concept (NFSC). This NFSC - including the performance of entire steel structures, natural fire curves ...
Programme: ECSC-STEELRES 8C
Record Number: 28861
Last updated on: 2002-12-13
ID: 7210-SA/322
Start date: 1994-07-01, End date: 1997-12-31
The research project aims to justify, for Eurocode 3 and Eurocode 4, and before they reach EN status, lower values for strength partial safety factors as compared to present boxed values. This research should result in more competitive, since lighter, steel constructions, a si...
Programme: ECSC-STEELRES 8C
Record Number: 28854
Last updated on: 2002-12-13
ID: 7210-SA/316
Start date: 1992-07-01, End date: 1995-06-30
This multinational research is aimed at providing a simplified method of calculating the buckling behaviour of hot rolled steel sections subject to fire to satisfy the requirements of Part 10 of Eurocode 3 concerned with Structural Fire Design. The works will involve theoretic...
Programme: ECSC-STEELRES 8C
Record Number: 7347
Last updated on: 2002-12-13
ID: 7210-TS/939
Start date: 1995-07-01, End date: 1998-12-31
The aim of this project is to produce pre-finished steel sheet with metallic coatings and - compared with conventional materials - significantly improved application-related properties (corrosion, forming, and joining behaviour and paintability) by means of galvannealing steel...
Programme: ECSC-STEELRES 8C
Record Number: 28892
Last updated on: 1995-08-24
ID: 7210-TS/937
Start date: 1994-07-01, End date: 1997-12-31
This proposed multinational project incorporates several complementary objectives: - to develop coil-coated sheets and panels with improved properties (adhesion, corrosion resistance, formability); - in view of future environmental regulation, to develop combinations of new to...
Programme: ECSC-STEELRES 8C
Record Number: 28890
Last updated on: 1995-08-24
ID: 7210-SA/937
Start date: 1994-07-01, End date: 1998-06-30
The aim of this research is to collect and complete existing worldwide know-how in natural fire engineering in order to form a consistent state of the art Natural Fire Safety Concept (NFSC). This NFSC - including the performance of entire steel structures, natural fire curves ...
Programme: ECSC-STEELRES 8C
Record Number: 28870
Last updated on: 1995-08-24
ID: 7210-SA/936
Start date: 1994-07-01, End date: 1997-12-31
The research project aims to justify, for Eurocode 3 and Eurocode 4, and before they reach EN status, lower values for strength partial safety factors as compared to present boxed values. This research should result in more competitive, since lighter, steel constructions, a si...
Programme: ECSC-STEELRES 8C
Record Number: 28869
Last updated on: 1995-08-24
ID: 7210-MB/938
Start date: 1993-07-01, End date: 1996-06-30
It is intended to prove that light weight automotive construction is feasible using steel by investigating the application of modern micro-alloyed steels, dual-phase steels and bake-hardening steels in terms of shaping, joining and tailored blanking, by improving the torsional...
Programme: ECSC-STEELRES 8C
Record Number: 23309
Last updated on: 1994-11-28
12 > 
List retrieved on: 2017-11-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top